or Connect
AVS › AVS Forum › Display Devices › Rear Projection Units › Hitachi 53SDX01B Convergence & manual
New Posts  All Forums:Forum Nav:

Hitachi 53SDX01B Convergence & manual  

post #1 of 3
Thread Starter 
Anyone know where I can obtain a service manual for this RPTV? The magic focus on the front doesn't work anymore, it automatically puts me in to static mode now. Anyone know what secret button to hit to reset this?

Thanks.
post #2 of 3
I've seen lots of same Hitachi RPTV sets with same convergence problems.

The most common defected part is the digital convergence module(aka CHIP BOARD). Factory asks $300 for a new one. I fixed one module by replacing E2prom(SMT) and some leak SMT capacitors on that board.

After you have E2prom and caps replaced, Enter service mode by shorting 2 test pins (behind focus pack).

It will take another 2-3 hours to get pre initialized convergence DONE!
post #3 of 3
If you live in California , Andrews electronic is one of Hitachi authorized part distributor. their phone number is 1-800-289-0300.

BTW. They carry service manual as well.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Rear Projection Units
This thread is locked  
AVS › AVS Forum › Display Devices › Rear Projection Units › Hitachi 53SDX01B Convergence & manual