I had luck finding a reseller who gave me a VIP 3D Theatre for testing and I want to let you know that it is running without any problems with my JVC DLA HD350 ! (afaik it's the RS10 in US)
It took me a few hours to find the right setup, but its looking great for the money now!
You have to use the Manual Mode (see Video 11 under Support on the 3D Now Website)
It's hard to find the best compromise between "To dark" and "To much flicker in bright scenes"
The best setup I could get is with 2 Pink lights and 2.5 Red lights on the RF transmitter. Now I have a little bit of flickering in bright scenes, but no ghosting or any other distortions. (Don't forget to frequently change the polarization of the glasses while searching for the right setup, it changes sometimes!)
You loose a lot of light and my Lamp is 900 hours old, so I took the Dynamic Preset, Iris 3, High Power Lamp Mode, set the Gamma Curve to 2.0, raised the contrast 25 Points and then changed the Colour Temperature so that I think the colours are ok.
Reaching a D65 Calibration in 3D is impossible for sure, but it is really viewable.
It is good enough to wait for Beamers that can produce more then 150 Lumens in 3D :-)
I've tested with MIB3, Nemo, The Hobbit and Iron Man. The scene in MIB3 where Will Smith jumps from the roof is GREAT! :-)
Need more 3D Movies now! :-)