My New Home Theater 2.0, Staggered Wall HT. - Page 4

Here it is --> http://www.displays2go.com/Product.aspx?ID=7030

Today, I installed one of the two LED poster frame. Reason was I ordered 2 OutletLinc from SmartHome, but they sent only 1 OutletLinc device, the other one was a correct OutletLinc box, but with a SmartLinc switch inside! Apparently, SmartHome's QC/Packing Dept. isn't that Smart.... Will need to contact them for a replacement after the holiday....

Anyway, here's some update pics for 1 of the frame.

Smarthome OutletLinc at the left


The transformer tucked in nicely inside the recess.




Also I paired the OutletLinc to a motion sensor, so whenever I walk into the basement, the poster will light up by itself and I've set the timer to turn it off in 2 mins if no motion detected. I really like the effect as we will get to see the poster lighted up everytime we are there. No user input or flip a switch is needed. I'll try to do a video when I have the other frame next week.
Edited by landshark1 - 9/2/12 at 5:28pm

Here's the video clip of the motion control of the LED light movie poster frame.

Down the road when we build the wet bar, the left wall of the entry, I'll also have the sensor to control the in cabinet and under cabinet lights too.

I guess I'm a lucky guy. She's totally love it too.

The Insteon OutletLinc that I'm using is a dimmerable controller. However, those LED poster frame just can't be dim due to it's very low load. And yes, they are mounted on either side of the door right before one enter the HT in the basement sitting/common area. Will build a wet bar there after the HT is done.

That looks very similar, but this is the actual frame that I use. http://www.displays2go.com/Product.aspx?ID=7030 Still love them, durable metal frame, and doesn't feel cheap or easy to break after a few changes.

Alright, finally I stole a couple days off from Big/Jeff's busy schedule to come work on my HT/fabric wall.

Here's some pics of hard working people.





The basic frame is almost done, yay!



Hopefully we'll finish sanding and start wrapping tomorrow.

Yeah, I think Big is done for building and sanding frames for awhile.

A bit more progress today. We spent a whole morning just to sand all the frames at Big's shop. Then we head to my house to build a few panels.

The back of the panel stuffed with Linacoustic.



Testing our design concept, stagger/patchy random wall pattern.


We like it a lot! The design is "different" than most other fabric wall design.

Edited by landshark1 - 10/22/12 at 6:20pm

Exactly. We tested with the Linacousitc underneath, we could quite easily see through the light color fabric. So we use Big's sample AT screen material to put it in between. Now we can't see it even when taking photos with the flash on.
Edited by landshark1 - 10/22/12 at 9:32pm