NANO LG LV9500 Official Owner's thread - Page 15

Originally Posted by Slickman

I can't see the blacks through all the blooming.

Originally Posted by JKTS

I have the LW9500 and cant get AG-s250 glasses to sync. I followed you process, something must be different! What firmware you on?
Can you please post pictures of your EZ tool options?

Also, I would like to point out that you dont actually have to run the in-stop command THIS IS FALSE to enable 3d processing. Just turn you TV off/on after you make the EZ changes... I did run the instop though just for good measure. It did nothing though.

Originally Posted by videkid

Might be time to upgrade your computer monitor, the photos only as good as the monitor. There was no visable blooming on the set or on the shot on my monitor. All full-array sets have blooming from the off angle. I printed the photo and used half the black ink cartridge.

Originally Posted by videkid

Please do not spread false information, my 3D is working and you are telling me you do not need the In-Stop. If you do not use the In-stop the 3D menu will show up and all it will do is make the image brighter, it will not make it 3D.

If you want your 3D to work, please follow the instructions. I have a W panel a the software update that was available when I turned the set on.

I turned on all 3D features (3) total including THX. I also went back and added the THX full function, it did no hurt the 3D at least after I had it added and functioning.

I want to help everyone obtain 3D, lets stick with the process that works.

Originally Posted by nony

Please post pics of all of your tool options, instart & ezadj menus, and system1/system2 values.

Oz: Note that the tool option defaults for the LW9500-TA are listed in the service manual that I linked to.

-nony

Originally Posted by videkid

Please do not spread false information....

Originally Posted by JKTS

Dude - I'm not spreading false info.
When I enabled the 3d options, the 3D menu did come up (as you say) and all it did was turn everything bright (as you say) but when I switched off/on my tv, the TV started processing 3D (as I said) but I did run the in-stop for good measure (as I said). If it does work without running IN-Stop, it may save people grief in re-doing all their settings again. Either way, it dosnt hurt swtching your TV off/on after you make your EZ Adjustments and testing........
Anyhow, apreciate your efforts with the pictures. I'll compare with mine and see what the difference is.

Originally Posted by arkasi55

I also had to run the InStop command - as originally suggested by nony early in this thread - before the picture would actually be processed. As you said, the picture would brighten, but no image processing would take place. It ran like this for a couple of weeks with multiple power cycles and it wasn't until I ran that command that it actually worked.

Maybe you got lucky??

What's interesting though is that you also have the LW9500 (as I do) but can't get the glasses to sync either. Do you happen to know what your part code is? It's located on the rear of the screen a big LG sticker with the model, product code and serial number.
Mine is 55LW9500-TA.AAUWLH.

There has been lots of talk about W and Y panels and how some do and don't have the 3D hardware, but as nony has mentioned a number of times - ALL panels support it.
I'm just wondering if there is some hardware difference between the LW9500 and LV9500

Originally Posted by arkasi55

I also had to run the InStop command - as originally suggested by nony early in this thread - before the picture would actually be processed. As you said, the picture would brighten, but no image processing would take place. It ran like this for a couple of weeks with multiple power cycles and it wasn't until I ran that command that it actually worked.

Maybe you got lucky??

What's interesting though is that you also have the LW9500 (as I do) but can't get the glasses to sync either. Do you happen to know what your part code is? It's located on the rear of the screen a big LG sticker with the model, product code and serial number.
Mine is 55LW9500-TA.AAUWLH.

There has been lots of talk about W and Y panels and how some do and don't have the 3D hardware, but as nony has mentioned a number of times - ALL panels support it.
I'm just wondering if there is some hardware difference between the LW9500 and LV9500

Originally Posted by videkid

Here are the rest, if you need anything else let me know.

Originally Posted by JKTS

I didnt get lucky - mine does and I have the same as yours. TA.AAUWLH...

I'm at work now so I cant compare my ez options with Videkid, but I did compare with yours - which is same as mine....

Differences are:

Tool 1: Tool "LW95".....................Videkid = "LV95"

Tool 2: Video & Audio ADC "11"......Videkid = "1" on both

Tool 3: Digital Eye = "0"................Videkid="1"
Energy Start = "off" ...................Videkid="on"

Tool 4: Different Digital demod and audio amp

Tool 5: Chanel browser = "1"...........Videkid = "0"
CNET = "0".................................Videkid = "1"

Tool 6 : N/a

I dont see how any of these would prevent glasses from synchronising.

I think we need to compare the In-Start options aswell.

Originally Posted by nony

You never know what dependencies have been put in the code.
.........
-nony

Originally Posted by videkid

Might be time to upgrade your computer monitor, the photos only as good as the monitor. There was no visable blooming on the set or on the shot on my monitor. All full-array sets have blooming from the off angle. I printed the photo and used half the black ink cartridge.

Originally Posted by KONICA TECH

Not having any luck with my glasses. When it syncs it seems to blow up the picture and everything is doubled figures, top and bottom. May even be the Sammy 3D blu ray player?

Originally Posted by KONICA TECH

Not having any luck with my glasses. When it syncs it seems to blow up the picture and everything is doubled figures, top and bottom. May even be the Sammy 3D blu ray player?

Originally Posted by 6athome

can w panels get 3d? and how? CAN ANYONE PUT IT TOGETHER ON ONE POST AND LET THE REST OF US IN ON 3D.I HAVE A W PANEL AND WILL SEND IT BACK IF ONLY THE Y PANELS HAVE 3D

Originally Posted by videkid

Do you have a AUS in your service code on the back of the set? Attached is the box my glassed came in, the last three letters match the letters on the back of my TV sets service code.

Originally Posted by videkid

Not going to get into the blooming debate with trolls, whatever you think is ok with me.

Originally Posted by KONICA TECH

Yes, they match yours.

Originally Posted by Turrican4D

Trolling? I analyzed your pictures with Irfan View and I'm just disappointed by halos. Sorry.

Originally Posted by videkid

.... I think I found the issue, its the glasses. The 3D glasses and my set both have a AUS in them. The glasses have a AG-S250/AUS on the side of the box. I believe you must have an AUS in your service code number for them to work.

This does not mean there is no a pair of glasses for you sets, just not the
AG-s250's.

I am playing with Monster universals, I do not think they will work but will keep you posted.