Originally Posted by Archaea
the wiring config? You think the JTR and the DTS-10 were playing out of phase or something? The wiring was all inside the DTS-10 box right? That's not something we would have screwed up. Did your buddy change it since? I'm taking your post to mean you really liked what you heard?
Originally Posted by HuskerOmaha
I don't think the DTS10 was wired correctly internally. Michael and Chris fixed it.
I'll wait to describe my observations until I hear it properly EQd and crossed.
The DTS-10 was purchased from Josh Ricci and was the one used for testing for data-bass.com. After the TC Sounds LMS-R drivers were tested in the enclosure, Josh reinstalled the original drivers. Due to their orientation, the drivers are supposed to be wired out of phase so that they then will fire in phase. You can change the wiring either internally when connecting to the Speakon on the cabinet or externally when connecting to the amp. The drivers were wired internally in phase at the time of the GTG and the speaker cables we used had Speakons which were wired normally. This resulted in the drivers firing out of phase.
It would have only take a few minutes to fix, but diagnosing the issue might have taken a while. We really didn't know much about about DTS-10 at the time and didn't know if the drivers were wired in series, in parallel, or wired separately in phase or out of phase.