Originally Posted by damelon
So I have a "Control" question. I've had a VW95ES for over 2 years now and I am looking to set up a centralized remote system. I have 2 products from Global Cache, an IP2SL and an IR2SL for controlling either RS232 or IR devices over the network. I initially was going to use the RS-232 control for the projector but ran into some problems.
1) I can't find the specific VW95ES RS232 Manual. I've found the VW85 and the VW1000 manuals, and many people have said to use the VW-1000 Manual since the options are almost all identical. If you have the actual VW95ES RS-232 control code manual, I'd like a copy!
2) When looking at the VW-10000 and the VW85 manuals, I noticed that there are no menu options listed for the "Lens Memory" aka "Position" feature. The only 3 commands I care about are Power Cycle, Lens Memory, and Motion Enhancer. Those are the only things I want to setup on iRule. Has anyone used these commands with iRule? If so, how did you do it?
Found a document that contained this info today!
RS-232 Codes for Motion Enhancer, Lens Memory Positions, and Power Cycle.
Model Doing What? Start Code Item No / ACK/NAK / Item No 1 Item No / ACK/NAK / Item No 2 SET/GET / ACK / Reply Data1 Data2 Check Sum End Code Command Type
MOTION ENHANCER - OFF \XA9\X00\X59\X00\x00\x00\x59\X9A
MOTION ENHANCER - LOW \XA9\X00\X59\X00\x00\x01\x5A\X9A
MOTION ENHANCER - HIGH \XA9\X00\X59\X00\x00\x02\x5B\X9A
PICTURE POSITION - 1 \XA9\X00\X66\X00\x00\x00\x66\X9A
PICTURE POSITION - 2 \XA9\X00\X66\X00\x00\x01\x67\X9A
PICTURE POSITION - 3 \XA9\X00\X66\X00\x00\x02\x68\X9A
PICTURE POSITION - 4 \XA9\X00\X66\X00\x00\x03\x69\X9A
PICTURE POSITION - 5 \XA9\X00\X66\X00\x00\x04\x6A\X9AEdited by damelon - 1/16/14 at 8:20pm