or Connect
New Posts  All Forums:Forum Nav:

4k virus

post #1 of 17
Thread Starter 
i did it too.

after visiting wolfgang here in germany and peter in miami, i got the 4k virus.

i planned to show you some pictures of my installation today, but a few things went wrong :

a) we had heavy rain here, so the new cinema was filled with more than 200 liters of water coming through the roof

b) 50 % of the gypsum ceiling had to be teared down...

c) nevertheless we tried to fire up the barco dp4k-b32 but we got a box from the supplier stating that inside is a 3 kw lamp, but inside was a 6.5 kw lamp
as i (fortunately? saves me a lot of money :-)) have problems seeing 3d and as my screen is 50 cm smaller than wolfgang´s, i don´t need so much power.

hoping that tomorrow we´ll get the new lamp and a new roof, i´ll keep you informed..

uwew
post #2 of 17
I hope you have success working through the issues you suffered today keeping you from enjoying your new equipment. Keep us posted and looking forward to those pictures.
post #3 of 17
hi uwe

nice to hear that you got the b32 but not so nice the other circumstances.

yes the 4k virus is one of the best virus you can get

today i got a visit from a us guy that have 42 cinema screens there.

a very good informed guy and it was a pleasure to show him my cinema and
the 4k 3d stills.

his reacton was the same as yours when you visit me he say
" it looks like real" to the 4k 3d stills but also he was very surprised to
see how good the 3d bd from advatar looks
with the doublestack 4k with the new infitec "E" system.
sad that he had just 3 hours time as his plane left early but it was a very nice time with him and possible not the last.
post #4 of 17
Glad to hear soon you will be operational.....

What lens did you get?

Does it hold the focus perfectly, mine (not being from the cinema side but a great fixed one) drifts a little bit from razor sharp.
post #5 of 17
Thread Starter 
@peter,

the lens is the 1.27 to 1.83 from barco..

we could not check if it drifts as we just installed it.

at the moment everything is wrapped in plastics.. we hope that we have the rooms dry and barely usable on friday..

@alan i plan to post the first pictures on fri/sam

uwe
post #6 of 17
Thread Starter 
Here a sneak preview in very poor quality...

the wrapped screen is 6 m wide.

the cabinet was custom built by us.

regards
uwe
LL
LL
LL
post #7 of 17
Ah the Doremi, very nice. Ask your cinema contact for the latest preview trail mix. It has Titanic in 3D.

You will probably have to upgrade the lens next spring for tru 4k.
post #8 of 17
Thread Starter 
still not finished, hope to get it done on monday or tuesday:









uwe
post #9 of 17
Thread Starter 
as there is still chaos on the site, still no pictures, but my equipment list :


ADA Mach IV B

Wisdom Audio
Speakers L75 (7)
Subwoofer STS (2)
Amplifiers SA-2 (8)

Dreambox 8000 HD Satellite Receiver (2)

OPPO BDP-93 BluRAy Player with SDI Modification

Doremi ShowVault 4k Cinema Server
Dolby CP 750 Sound Processor

Kaleidescape
M700 Vaults (3) Region A,B,C
1U Server (1)
3U Server (2)

all the above is controlled by crestron touch panels

uwew
post #10 of 17
Hi Uwe,

Did you get the ontrol info you were looking for?
post #11 of 17
Thread Starter 
hi marc!

i got it from peter, it´s a 500+ pages document :-)

he gave me also the address of his programmer in case of questions..

monday we´ll have the crestron guys here to do the final adjustments and we will find out if they understand it or not...

also the cineak seats will arrive tomorrow.

if´s coming to an end...

uwe
post #12 of 17
Uwe,

Let me know if the Crestron programmer needs some sample Crestron commands. Also, the RS-232 Baud rate has to be at 115,200 for it to work. This is unusual, since lower Baud rates are normally better for compatibility.
post #13 of 17
Hi guys, what you will find interesting of my guy is that he is one of the few programmers that does it via IP instead of rs-232.

You still need to download the vnc app for doremi. In order to row the showvault in an ipad. At the moment the api that is available has no easy way of selecting IMB inputs (internal,hdmi,sdi), I got an email yesterday from the president of doremi indicating they are going to code something to simplify this.
post #14 of 17
Thread Starter 
Thanks peter and odyssey for your help, i´ll come back to you if we don´t solve it monday.

pictures are coming tomorrow, if i find out how to post them properly...

uwew
post #15 of 17
Uwe,

A few more thoughts from my experience with my Barco DCI projectors and Crestron.

The only Crestron control needed is to execute Barco Communicator macros. Communicator is Barco's PC application for control of DCI projectors and it comes in three versions, with the most capable at a modest cost. You can have an unlimited number of Communicator macros and they can range from a single function, like turn projector lamp on, to many commands executed in sequence. The only tricky part of the macro execute command string is the checksum, and a really top level Crestron programmer will know how to do that automatically so that it doesn't have to be calculated manually. Don't ask me how to do this part because it's way beyond my capability.

The other very useful Crestron function is to integrate Communicator into the Crestron system through Crestron "Touch The PC" module. You can have Communicator displayed on your Crestron panel and control it through touch.
post #16 of 17
Quote:
Originally Posted by uwew View Post

as there is still chaos on the site, still no pictures, but my equipment list :


ADA Mach IV B

Wisdom Audio
Speakers L75 (7)
Subwoofer STS (2)
Amplifiers SA-2 (8)

Dreambox 8000 HD Satellite Receiver (2)

OPPO BDP-93 BluRAy Player with SDI Modification

Doremi ShowVault 4k Cinema Server
Dolby CP 750 Sound Processor

Kaleidescape
M700 Vaults (3) Region A,B,C
1U Server (1)
3U Server (2)

all the above is controlled by crestron touch panels

uwew


Congratulations! I like the size and configuration of the setup - all components seem to be carefully selected. You have been starting a big undertaking and everything seems to turn out positive. Your audio setup is astonishing - who had the idea? I am very familiar with these kind of speakers as I am driving 2 Quad ESL63 Professional Monitor Series in my stereo setup. I assume you will receive a very, very natural soundstage. Stunning: the specs show a sensivity of 99db, I have no clue how they reach this extreme level. So good luck when firing the system up!
post #17 of 17
Quote:
Originally Posted by mporlier View Post

Hi Uwe,

Did you get the ontrol info you were looking for?

Hi Marc,

this is OT, but let me ask a short question: I own a DP-1200 and when I send a signal via HDMI to the DVI input, is the signal reclocked inside of the DP-1200 or is the BluRay-player working as a kind of masterclock?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: D-cinema Equipment and Theaters