Originally Posted by zombie10k
Lumen measurements behind the glasses were not provided
in my report so the math cannot be calculated this way. The Y value is a direct measurement from the meter before and after the glasses.
I guess I'm not reading your report correctly then. This is what I'm basing my calculations on:
2D Stage Mode, All Factory Settings
200 Lux x 5.59 Sq-meters= 1118 Lumens
Stage 3D stage Mode - D65 calibration (through the glasses)
100 Lux x 5.59 Sq-meters = 559 Lumens
Those are your numbers are they not? D65 calibration (through the glasses)
559 is exactly 50% of 1118. What am I missing?