AVS Forum banner

The Pioneer BDP-62FD/150/450 2012 Blu-ray Player Thread

233K views 725 replies 213 participants last post by  peptalk1 
#1 ·

    This could be a good thread to discuss everything from pre-production, all the way up to user discussions once they have been released. I thought it would be a good idea to start this thread even before Pioneer begins preparing for this lineup. This might give Pioneer a chance to take our requests into consideration. After seeing Pioneer's recent model number paterns, I have a pretty good idea of the new model numbers for these players. For those of you who have been following Pioneer worldwide, I'm sure you have an idea of what models are specific to North America, and what models are specific to the rest of the world. If they turn out to be wrong, I beg the moderators to correct them. (I just corrected the model numbers for those who find this thread.)

 

    I would like to start off with my input.


I understand that due to economic conditions, Pioneer's player manufacturing plant has closed. I have no problem with Pioneer relying on OEMs. It's just that Sharp and TCL are low-quality manufacturors. Sharp's players lack features, and TCL's hardware is buggy. Oppo and Cambridge's highly-regarded players are built by BBK, while Denon's, Marantz's, and Yamaha's highly-regarded players are built by Inkel (Sherwood's parent company).


As far as features are concerned, I would like the MediaTek MT8555 chipset as the player's brain for speed and functionality. he IR sensor was very weak and narrow on the 2011 lineup. Please consider the Marvell QDEO technology for video processing. For those who have receivers before 2011 and 2012, please add: 176.4 KHz, 24 bit output when SACD is being output as PCM so that PQLS could be taken advantage of even at a high FS value. Adding the Sound Retriever feature to the player would make compressed MP3s, WMAs, and iTunes files,, as well as standard definition Dolby Digital, and DTS soundtracks sound as good as CDs and Blu-ray discs so that once the player converts these sources to PCM output, PQLS would be even more effective when used with receivers not compatible with PQLS bitstreaming. Adding Stream Smoother to the actual player would reduce compression artifacts when playing content recorded at a lower bitrate such as single-layer DVDs and single-layer Blu-ray discs, as well as streaming sources such as Netflix and Youtube, when the player is used with older receivers which don't have this feature. For those who prefer video processing to be done either by a connected receiver or display, Source Direct would be greatly appreciated. Adjustable gamma (below and above the nutral position) would be useful for those displays that have trouble with detail in dark scenes. I'm not an expert on AVI, DivX, and WMV. So that's where suggestions from the other forum members could greatly help to contribute. I hope some Pioneer representatives worldwide stumble upon this thread before these new players go into production so that maybe we'll finally be able to get a player that lives up to the Pioneer tradition we so greatly love and miss.
 
See less See more
#2 ·
I wasn't aware I actually created this thread all the way back in January. No wonder you said it was a little early, Jleholeho! Anyway ... Now that Pioneer started sales, as well as preproduction for their 2012 A/V receiver lineup, has anyone heard any inside information on their 2012 Blu-ray player lineup?
 
#3 ·
When playing DVD-AUDIO and DVD-VIDEO from a USB storage device, allow the player to read the AUDIO_TS or VIDEO_TS folder the same way as if inserting a DVD-AUDIO or DVD-VIDEO disc so we can have access to menus and play modes. Likewise, when playing Blu-ray video from a USB storage device, allow the player to read the BDAV and BDMV folders the same way as if inserting a Blu-ray disc so we can have access to menus and play modes.
 
#5 ·
I'm not sure how the current zoom function performs on the 2011 models, but I would like to see an incremental zoom function like the LG uses (or used to use, I checked out their 2012 lineup and it looks like they've dropped their zoom function).


Pretty much all zoom functions are far too choppy and coarse. As far as I'm aware, LG are the only ones that have a zoom function that zooms directly into the middle of the frame without any picture distortion and also zooms in very small increments. This is good for all those annoyingly windowboxed 4x3 Criterion DVDs.
 
#6 ·

Quote:
Originally Posted by Big C /forum/post/21885902


I wasn't aware I actually created this thread all the way back in January. No wonder you said it was a little early, Jleholeho! Anyway ... Now that Pioneer started sales, as well as preproduction for their 2012 A/V receiver lineup, has anyone heard any inside information on their 2012 Blu-ray player lineup?

Got a presentation from Pioneer on BDP-150 and BDP-450


BDP-450 will feature WiFi + Qdeo + 2xHDMI out + IP controll above all the things BDP-440 got. 249-299 Euro. Can be a great player. More or less BDP-LX55 moving down.


Looked lite BDP-150 will be more or less the same as BDP-140. Maybe more conent and quicker. But still no WiFi(optional), 3D, SACD, DNLA.


Only got a presentation of the USP, no deep tech spec.
 
#7 ·

Quote:
Originally Posted by PalmiNio /forum/post/21951297


Got a presentation from Pioneer on BDP-150 and BDP-450


BDP-450 will feature WiFi + Qdeo + 2xHDMI out + IP controll above all the things BDP-440 got. 249-299 Euro. Can be a great player. More or less BDP-LX55 moving down.


Looked lite BDP-150 will be more or less the same as BDP-140. Maybe more conent and quicker. But still no WiFi(optional), 3D, SACD, DNLA.


Only got a presentation of the USP, no deep tech spec.
thanks for the news and keep us updated when more news arrive



The presentation was made in a european country ?


thanks
 
#16 ·

Quote:
Originally Posted by jleholeho /forum/post/22014556


I wish Pio would include IR-control in/out in the new BDP-450...the remote controls/sensors are totally weak on both BDP-440 and LX55...

But how do you know that the IR sensors will still be weak on the new models? Maybe Pioneer changed OEMs after all the customer complaints. If the BDP-450 is the same thing as a combination of the new BDP-150 and BDP-LX55, I wonder what the BDP-LX56 could possibly add?
 
#17 ·

Quote:
Originally Posted by Big C /forum/post/22017161


But how do you know that the IR sensors will still be weak on the new models? Maybe Pioneer changed OEMs after all the customer complaints. If the BDP-450 is the same thing as a combination of the new BDP-150 and BDP-LX55, I wonder what the BDP-LX56 could possibly add?

Yup, they might as well proceed to implement some more quality sensors, after all...with the current players, it´s obvious that both remote control and a sensor on front panel are pretty weak...when I´m using the remote from my VSX-1121 to control my BDP-440, I can see a little "signal-boost" but it´s still pretty weak compared to when controlling the AVR...that means the front sensor on the BDP-440 is a real crap...if there was IR control out on the player now, it´d fix this easily as the main controlling sensor would be the stronger one on the AVR
 
#18 ·
The two features which matter most to me at this time are DSD-to-PCM at 176.4 KHz, 24 bit with PQLS, and adjustable gamma in the video parameters. From what I understand, I might have sent my suggestions to Pioneer a little too late this year in order for them to be considered. So I might try again next January at the latest. I probibly should send my suggestions for the 2013 receiver and Blu-ray player lineups to Pioneer during the fall of this year.
 
#20 ·
When info from the other models will be available?!?!
 
#22 ·

Quote:
Originally Posted by realzven  /t/1390589/the-pioneer-bdp-61fd-63fd-150-450-lx56-2012-blu-ray-player-thread#post_22123889


in europe the 150 is available, but no news for the BDP-450 nor the LX56...

Maybe Chris Walker "Walkamo" can provide more insider info
The 150 got a bad report in the 2011 thread. It looks like I won't be getting these players either, if they'll be a repeat of last year. So would October or November be a good time to write to Chris Walker, as well as Pioneer of Japan, with the features I would like to see added in their 2013 A/V receiver AND Blu-ray player lineups?
 
#23 ·

Quote:
Originally Posted by Big C  /t/1390589/the-pioneer-bdp-61fd-63fd-150-450-lx56-2012-blu-ray-player-thread#post_22127616


The 150 got a bad report in the 2011 thread. It looks like I won't be getting these players either, if they'll be a repeat of last year. So would October or November be a good time to write to Chris Walker, as well as Pioneer of Japan, with the features I would like to see added in their 2013 A/V receiver AND Blu-ray player lineups?

Only Chris can answer...
 
#24 ·

Quote:
Originally Posted by Big C  /t/1390589/the-pioneer-bdp-61fd-63fd-150-450-lx56-2012-blu-ray-player-thread#post_22127616


The 150 got a bad report in the 2011 thread. It looks like I won't be getting these players either, if they'll be a repeat of last year. So would October or November be a good time to write to Chris Walker, as well as Pioneer of Japan, with the features I would like to see added in their 2013 A/V receiver AND Blu-ray player lineups?
Oh common...
Quote:
Hi Realzven,


Unfortunately the DSD-PCM conversion is limited to 88.2KHz at 20-Bit. This is a limitation of the MTK chipset..


I am still awaiting an answer for the Gamma control....


thanks,


Chris Walker

Pioneer Electronics

We are talking about the low model ... I don't think that for most people that buy this model find that important... even in the 450 I don't think that matters a lot...

SACD is not a big format... I only have a few of them (from only one band) cause no other bands (that I like) release a SACD version of their cds...

I'd rather had a better player in terms of video settings and features than a better SACD, of course at this price range
 
#26 ·

Quote:
Originally Posted by Speakerphile  /t/1390589/the-pioneer-bdp-61fd-63fd-150-450-lx56-2012-blu-ray-player-thread#post_22168654


The latest I heard was that Pioneer was developing the new Elite players completely in-house. For what it's worth... This is good news to me!

I don´t trust any rumours about in-house production when it comes to Pio BDPs...

Walkamo said exactly the same thing some 10 months ago about the BDP-440/52FD and BDP-LX55/53FD and what happened? A bunch of strange behaviors from the players, Pio´s inability to release some competent firmware upgrade, freezing, no goddamn track/chapter number on display, catastrophic remote controls/sensors...

a Pio EU employee assured me in April that FW update for BDP-440 will be coming out within the end of May, it´s end of June and there´s NOTHING...

yesterday I played some .FLACs via DLNA on my BDP-440, I had to re-connect it to the wall outlet twice as it completely froze on me...

Until I read some unbiased review of the new Pio BDPs, confirming quality and bugless performance, I´m out of it...and I suggest everyone to do the same...
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top