how would this perform

Subscribe Search This Thread

Start a New Thread

post #1 of 7

1/31/12 at 2:20pm

Thread Starter

176 Posts. Joined 9/2010
Thumbs Up: 10
Select All Posts By This User

Power handling: 250 watts RMS/500 watts max • VCdia: 2-1/2" • Le: 1.94 mH • Impedance: 4 ohms • Re: 3.23 ohms • Frequency range: 23-200 Hz • Fs: 23 Hz • SPL: 89 dB 2.83V/1m •Vas: 4.12 cu. ft. • Qms: 5.59 • Qes: 0.44 • Qts: 0.41 • Xmax: 9.3 mm • Dimensions: Overall diameter: 12", Cutout diameter: 11", Depth: 6".

if this was in a 2.45 ported box and a 4x 12-14inch port. 300 watt bash amp
i have no software to figure this out your help would be great
thanks

AVS Top Picks

post #2 of 7

1/31/12 at 3:10pm

Scott Simonian
Trader Feedback: 0
I've called it 'The P45'
offline

10,481 Posts. Joined 10/2001
Location: Clovis, "Cullyfornia"
Thumbs Up: 53
Select All Posts By This User

Working with very little information here... no listed Sd ... just guess that it's an average 12". Also "4x 12-14inch port"... what the hell does that mean? Do you want four 12" ports cuz.... no. I'm guessing you meant a single 4 inch port around 12-14 inches long. You're looking at a tune in the mid to upper 20's. Okay by any stretch but it aint gonna hang with the big boys. That's for sure.

What driver is this?

post #3 of 7

1/31/12 at 3:21pm

Thread Starter

176 Posts. Joined 9/2010
Thumbs Up: 10
Select All Posts By This User

http://www.parts-express.com/pe/show...number=295-204 yes one 4inch round 12-14inch long port. its the dayton sub at parts express. i swear its the same woofer in my ed a2 200 but i could be wrong. Would this setup hang with the a2 300? sorry for the lack of info

post #4 of 7

1/31/12 at 4:55pm

11,328 Posts. Joined 10/2003
Location: Richmond, VA
Thumbs Up: 52
Select All Posts By This User

ed specs are shaky at best.

e.g., what is "room tuning"

post #5 of 7

1/31/12 at 5:02pm

Thread Starter

176 Posts. Joined 9/2010
Thumbs Up: 10
Select All Posts By This User

hmm no idea on the room tuning. its 23x14x7.5. riser takes up half the floor and is one foot tall. the ed woofer looks just like the dayton, like i said i could be wrong. mybe the internals are different, they said the ed has a 1inch excursion so maybe its not the same.

post #6 of 7

1/31/12 at 5:09pm