AVS › AVS Forum › Display Devices › LCD Flat Panel Displays › Official LG 47LM6700/55LM6700 "Passive 3D" Owners Thread - 2012
New Posts  All Forums:Forum Nav:

Official LG 47LM6700/55LM6700 "Passive 3D" Owners Thread - 2012 - Page 64

post #1891 of 2044
3/20/13 at 3:46pm
I snagged the 47LM6700 at Costco last week for $699.99. Like other LGs, they don't list them online, but that's what I paid in Louisville, KY.
Reply
Reply

Gear mentioned in this thread:

post #1892 of 2044
3/20/13 at 6:04pm
New software update today(3/20/13), can't figure out what is included.
Reply
Reply
post #1893 of 2044
3/20/13 at 10:13pm
Quote:
Originally Posted by aaron3722 View Post

Ive had the same trouble, i watch immortals in 3d and it did it around 3 to 4 times during the whole film (to what i noticed) , im sure when i first tried the 3d i did not see any of this tv switch (like it was swapping from left to right?), i have my 3d setting to - 3d depth at 7 and 3d viewpoint to -10.

Not sure if anything to do with the user settings that ive set up and thats where we are both getting the trouble from? But im sure ive tried to reset settings and think it still did same thing??

If anyone can help us out please post a reply , just in case there is a problem with both our sets?
What I'm noticing now is the 3D image phasing in and out of 3D, like the images are fusing together. The tech will be out in the morning with a new board to see if that fixes it.
Reply
Reply
post #1894 of 2044
3/21/13 at 3:12am
Quote:
Originally Posted by Postal68 View Post

New software update today(3/20/13), can't figure out what is included.

Ver.04.34.01

Just downloaded. I'm not sure of any of the details yet.
Reply
Reply
post #1895 of 2044
3/21/13 at 12:51pm
Quote:
Originally Posted by Caleb Hamilton View Post

What I'm noticing now is the 3D image phasing in and out of 3D, like the images are fusing together. The tech will be out in the morning with a new board to see if that fixes it.

Tried watching 3D with they're standard settings and all was fine, seems to do it only when I change the depth control, bit of a one or the other as I sit only few feet away the -10 depth makes it clear and look better especially around the edges of screen but it does that sifting thing or no sifting thing but not as good picture just because im that bit closer then you should?

Still love set and think passive 3D on this set knocks my 1st gen Samsung active 3D out of the park
Reply
Reply
post #1896 of 2044
3/21/13 at 1:44pm
Quote:
Originally Posted by aaron3722 View Post

Ive had the same trouble, i watch immortals in 3d and it did it around 3 to 4 times during the whole film (to what i noticed) , im sure when i first tried the 3d i did not see any of this tv switch (like it was swapping from left to right?), i have my 3d setting to - 3d depth at 7 and 3d viewpoint to -10.

Not sure if anything to do with the user settings that ive set up and thats where we are both getting the trouble from? But im sure ive tried to reset settings and think it still did same thing??

If anyone can help us out please post a reply , just in case there is a problem with both our sets?

I'm returning this copy of The Hobbit tonight. I tested several other 3d movies, Avengers, Monsters Inc, Harry Potter, Finding Nemo, and none of them have the same problem. I'm going to assume a faulty disc or encoding. I'll let you all know what I find out.
Reply
Reply
post #1897 of 2044
3/21/13 at 1:59pm
Hi;

Does anyone know if this is a true 120Hz refresh rate or is it just simulated? I'd love to pick one up for gaming but I'm looking for a true 120Hz refresh rate. (rather than having to switch to "Gaming" mode to alleviate input lag and then it gets dropped down to 60Hz refresh)

Thanks!!

Cheers!
Logun
Reply
Reply
post #1898 of 2044
3/21/13 at 2:02pm
Quote:
Originally Posted by Logun View Post

Hi;

Does anyone know if this is a true 120Hz refresh rate or is it just simulated? I'd love to pick one up for gaming but I'm looking for a true 120Hz refresh rate. (rather than having to switch to "Gaming" mode to alleviate input lag and then it gets dropped down to 60Hz refresh)

Thanks!!

Cheers!
Logun

It's a 60hz panel.
Reply
Reply
post #1899 of 2044
3/21/13 at 2:20pm
Don' think the lag has anything to do with the hz rating. That will just combat blurring and things like that.
Reply
Reply
post #1900 of 2044
3/21/13 at 2:21pm
Quote:
Originally Posted by Logun View Post

Hi;

Does anyone know if this is a true 120Hz refresh rate or is it just simulated? I'd love to pick one up for gaming but I'm looking for a true 120Hz refresh rate. (rather than having to switch to "Gaming" mode to alleviate input lag and then it gets dropped down to 60Hz refresh)

Thanks!!

Cheers!
Logun

I believe the 7600 is true 120Hz
Reply
Reply
post #1901 of 2044
3/21/13 at 3:15pm
Quote:
Originally Posted by jont189 View Post

It's a 60hz panel.

k thank you!
Reply
Reply
post #1902 of 2044
3/21/13 at 4:51pm
Quote:
Originally Posted by Caleb Hamilton View Post

What I'm noticing now is the 3D image phasing in and out of 3D, like the images are fusing together. The tech will be out in the morning with a new board to see if that fixes it.

Caleb,
Please let us know what they charged you since I'm considering getting a tech out to my place for my edge (screen) bleed.
Reply
Reply
post #1903 of 2044
3/22/13 at 8:46am
I recently purchased an LG 55inch LM6700 and I noticed something really weird when watching 3D. I'm using a PS3 to play the discs. When the glasses are taken off, you see a double image (left and right eye images). Even if I pause the movie, the double image keeps fluctuating. What's happening is that the separation between them is increasing and decreasing randomly. Sometimes it happens and sometimes it doesn't. This is happening even when the movie is playing resulting in depth changes in the overall image. I'm wondering if my TV is defective. The parallax increases and decreases randomly. I thought maybe that's how most BDs are encoded but it's happening even when the picture is paused. It keeps on fluctuating.

I'll post a video showcasing it later today.

EDIT
Caleb, is this the same issue that you are facing? Did you get it fixed?



EDIT #2:

Added video :

http://www.youtube.com/watch?v=JIeCHTDaUbU


Notice the parallax/image separation that keeps randomly increasing and decreasing. It's supposed to stay constant but it doesn't. Is my TV defective?
I'm using a PS3 to play the blu-ray. This is happening with every 3D Blu-ray where the image separation keeps changing, even when the movie is paused. (The movie in the video is the menu from The Avengers 3D.)
Edited by srinivas1015 - 3/22/13 at 10:31am
Reply
Reply
post #1904 of 2044
3/22/13 at 8:57am
Netflix 3d Streaming titles are sort of dodgy at the moment. They just rolled it out. But a tech said it needs at least 6MB speeds to run well. Your provider may state you are getting that, but do a speed test to verify it. For those of you who don't know what I mean:::google SPEED TEST, stop all internet activity, then run it to find out what you are actually getting. biggrin.gif
Reply
Reply
post #1905 of 2044
3/22/13 at 11:01am
Quote:
Originally Posted by srinivas1015 View Post

I recently purchased an LG 55inch LM6700 and I noticed something really weird when watching 3D. I'm using a PS3 to play the discs. When the glasses are taken off, you see a double image (left and right eye images). Even if I pause the movie, the double image keeps fluctuating. What's happening is that the separation between them is increasing and decreasing randomly. Sometimes it happens and sometimes it doesn't. This is happening even when the movie is playing resulting in depth changes in the overall image. I'm wondering if my TV is defective. The parallax increases and decreases randomly. I thought maybe that's how most BDs are encoded but it's happening even when the picture is paused. It keeps on fluctuating.

I'll post a video showcasing it later today.

EDIT
Caleb, is this the same issue that you are facing? Did you get it fixed?



EDIT #2:

Added video :

http://www.youtube.com/watch?v=JIeCHTDaUbU


Notice the parallax/image separation that keeps randomly increasing and decreasing. It's supposed to stay constant but it doesn't. Is my TV defective?
I'm using a PS3 to play the blu-ray. This is happening with every 3D Blu-ray where the image separation keeps changing, even when the movie is paused. (The movie in the video is the menu from The Avengers 3D.)

srinivas1015, did you try other movies?

Mine is doing this too. I have the Sony bdp-s590 I think... but this problem is only happening in the Hobbit, and only in action sequences. Is yours like that the whole movie?
Reply
Reply
post #1906 of 2044
3/22/13 at 11:07am
Quote:
Originally Posted by jont189 View Post

srinivas1015, did you try other movies?

Mine is doing this too. I have the Sony bdp-s590 I think... but this problem is only happening in the Hobbit, and only in action sequences. Is yours like that the whole movie?


Yes, I did try other movies and it's happening in a lot of places and randomly too. I tried Journey To The Center Of The Earth, Underworld Awakening (it's apparent in the menu), The Amazing Spider-Man and Fright Night.

It's probably there in a lot of scenes in The Hobbit, it's probably just too subtle to notice. I'm wondering if it's a defect with the TV or an issue with Sony players..

I just updated my firmware to 4.20.11 and it's still the same.
Reply
Reply
post #1907 of 2044
3/22/13 at 11:24am
Quote:
Originally Posted by srinivas1015 View Post

Yes, I did try other movies and it's happening in a lot of places and randomly too. I tried Journey To The Center Of The Earth, Underworld Awakening (it's apparent in the menu), The Amazing Spider-Man and Fright Night.

It's probably there in a lot of scenes in The Hobbit, it's probably just too subtle to notice. I'm wondering if it's a defect with the TV or an issue with Sony players..

I just updated my firmware to 4.20.11 and it's still the same.
I'm at a loss on mine. I am watching hobbit right now. Mine isn't the same as your problem. In the hobbit the whole picture looks in focus at once. It hurts your eyes and the 3d effect only worsens it.
Reply
Reply
post #1908 of 2044
3/22/13 at 12:23pm
Quote:
Originally Posted by jont189 View Post

I'm at a loss on mine. I am watching hobbit right now. Mine isn't the same as your problem. In the hobbit the whole picture looks in focus at once. It hurts your eyes and the 3d effect only worsens it.

Updated my DVD player. All is well now.
Reply
Reply
post #1909 of 2044
3/22/13 at 6:36pm
http://www.youtube.com/watch?v=F9yINBp3SvM
http://www.youtube.com/watch?v=ig-TgGensys

search in YouTube "3d pop out"
Reply
Reply
post #1910 of 2044
3/23/13 at 6:33pm
Quote:
Originally Posted by srinivas1015 View Post

I recently purchased an LG 55inch LM6700 and I noticed something really weird when watching 3D. I'm using a PS3 to play the discs. When the glasses are taken off, you see a double image (left and right eye images). Even if I pause the movie, the double image keeps fluctuating. What's happening is that the separation between them is increasing and decreasing randomly. Sometimes it happens and sometimes it doesn't. This is happening even when the movie is playing resulting in depth changes in the overall image. I'm wondering if my TV is defective. The parallax increases and decreases randomly. I thought maybe that's how most BDs are encoded but it's happening even when the picture is paused. It keeps on fluctuating.

I'll post a video showcasing it later today.

EDIT
Caleb, is this the same issue that you are facing? Did you get it fixed?



EDIT #2:

Added video :

http://www.youtube.com/watch?v=JIeCHTDaUbU


Notice the parallax/image separation that keeps randomly increasing and decreasing. It's supposed to stay constant but it doesn't. Is my TV defective?
I'm using a PS3 to play the blu-ray. This is happening with every 3D Blu-ray where the image separation keeps changing, even when the movie is paused. (The movie in the video is the menu from The Avengers 3D.)

i do not notice that on mine. i will pop in avengers later and try again. any specific scene where it is really noticeable? i will try hobbit too, just let me know what scene it happens.
Reply
Reply
post #1911 of 2044
3/24/13 at 11:29am
Try disabling

3D pattern recognition on the 3D settings.

Maybe it could fix your specific trouble with that bluray player.
Reply
Reply
post #1912 of 2044
3/24/13 at 1:18pm
hello, question for you!
I recently updated to 04.34.01 and have a slightly annoying issue now.
Whenever i 'stream' (as in not OTA video) the video stutters.
This seems to happen on any video stream other than OTA.
This happens on videos being shared/streamed via Plex, from a USB stick, and netflix.

It is extremely annoying. Anyone have any tips to get it to stop?

At first i thought it was plex, then i tried from USB and saw the same issue.
It plays and seems to stutter/drop frames every 2 seconds or so.

using HDMI 1, haven't tried any other inputs.
plex 0.9.7.17 (shouldn't matter since still stutters on non-plex media)
oh, and the TV is the LG 55LM6700

any hints/tips/etc would be rad.

Thank-you.

*edit*
I have also unplugged the TV and had it off for a few minutes and tried again
Also did a reset on the TV, still same issues.
Called the 1800 number on the details screen, was on the phone with them for a while, was told they will call me back. This seems to be more than just me having this issue.
Edited by garfunkalow - 3/24/13 at 5:08pm
Reply
Reply
post #1913 of 2044
3/24/13 at 4:04pm
Can anyone tell me what an average visit from an LG tech has cost them (would cost)?

I've read their website regarding visits and repairs and the text is confusing to me. I want them to come out and look at my edge bleed but I don't want to pay for something I shouldn't have to pay for.
Reply
Reply
post #1914 of 2044
3/24/13 at 7:51pm
Hi, I see illumination uniformity problems in the panel of my 6700, when I watch movies with the lights off or the tv is no signal, I advise?. This is an example of how it looks:


This of because the panel is edge-led?


Thanks!
Reply
Reply
post #1915 of 2044
3/24/13 at 7:52pm
Hi, I see illumination uniformity problems in the panel of my 6700, when I watch movies with the lights off or the tv is no signal, I advise?. This is an example of how it looks:


This of because the panel is edge-led?


Thanks!
Reply
Reply
post #1916 of 2044
3/24/13 at 11:11pm
Egvo,
This is almost exactly how mine looks!
Reply
Reply
post #1917 of 2044
3/25/13 at 1:23pm
Quote:
Originally Posted by garfunkalow View Post

hello, question for you!
I recently updated to 04.34.01 and have a slightly annoying issue now.
Whenever i 'stream' (as in not OTA video) the video stutters.
This seems to happen on any video stream other than OTA.
This happens on videos being shared/streamed via Plex, from a USB stick, and netflix.

It is extremely annoying. Anyone have any tips to get it to stop?

At first i thought it was plex, then i tried from USB and saw the same issue.
It plays and seems to stutter/drop frames every 2 seconds or so.

using HDMI 1, haven't tried any other inputs.
plex 0.9.7.17 (shouldn't matter since still stutters on non-plex media)
oh, and the TV is the LG 55LM6700

any hints/tips/etc would be rad.

Thank-you.

*edit*
I have also unplugged the TV and had it off for a few minutes and tried again
Also did a reset on the TV, still same issues.
Called the 1800 number on the details screen, was on the phone with them for a while, was told they will call me back. This seems to be more than just me having this issue.

I have the LG 42LS5700, and have been having the same problem for about a month now. PLEX (using MediaLink) stutters and Netflix stuttters, then stops. I've reset my router, tried WiFi and ethernet connections, no improvement. I'm hoping a firmware upgrade - I'm on 04.34.01 - will fix it. Has to be software - I access the same movies that I usually watch through PLEX/MediaLink through the "LG SmartShare" app with no stuttering.
Reply
Reply
post #1918 of 2044
3/25/13 at 1:36pm
Dellamorte13:

I did the following:
1) wipe the panel with a damp microfiber water only
2) Use a dry microfiber pace and firmly with the open hand which had white shadows "clouding" and disappeared, run your hand over all the edges of the TV and although they look a little longer is not terrible.

Last night I watched a movie and not notice the clouding.

Note: I read that the EDGE-LED Technology has this problem so this is normal, so for the next we have to go to a FULL-LED TV.

Anyway I wrote to LG support Colombia to see that I say and tell you.

Greetings from Colombia!

Edwin.
Reply
Reply
post #1919 of 2044
3/25/13 at 1:38pm
please use Smart share is better, im recomended Windows 8 pro.
Reply
Reply
post #1920 of 2044
3/26/13 at 7:49am
Quote:
Originally Posted by garfunkalow View Post

hello, question for you!
I recently updated to 04.34.01 and have a slightly annoying issue now.
Whenever i 'stream' (as in not OTA video) the video stutters.
This seems to happen on any video stream other than OTA.
This happens on videos being shared/streamed via Plex, from a USB stick, and netflix.

It is extremely annoying. Anyone have any tips to get it to stop?

At first i thought it was plex, then i tried from USB and saw the same issue.
It plays and seems to stutter/drop frames every 2 seconds or so.

using HDMI 1, haven't tried any other inputs.
plex 0.9.7.17 (shouldn't matter since still stutters on non-plex media)
oh, and the TV is the LG 55LM6700

any hints/tips/etc would be rad.

Thank-you.

*edit*
I have also unplugged the TV and had it off for a few minutes and tried again
Also did a reset on the TV, still same issues.
Called the 1800 number on the details screen, was on the phone with them for a while, was told they will call me back. This seems to be more than just me having this issue.

90% of my viewing is through plex or a usb drive. i don't have the stutter problem, and have also updated to the latest firmware. i am using plex 0.9.6.3
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: LCD Flat Panel Displays

Gear mentioned in this thread:

AVS › AVS Forum › Display Devices › LCD Flat Panel Displays › Official LG 47LM6700/55LM6700 "Passive 3D" Owners Thread - 2012