or Connect
AVS › AVS Forum › Display Devices › LCD Flat Panel Displays › Official LG XXLM7600 Owners Thread...
New Posts  All Forums:Forum Nav:

Official LG XXLM7600 Owners Thread... - Page 59

post #1741 of 3922
Quote:
Originally Posted by powrwrap View Post

I'd be surprised if it happens during blu-rays. I wish it wouldn't happen when watching .mkv files but it looks like we now have two data points to show that it does happen, so maybe it is "normal." I swear it happens at regular time intervals. I was watching one night and started timing it. It seemed to occur every five minutes.

well is very strange this, but not happen all the time, is in some fast movement in the movie, I don't know it's the true motion... it could be???
post #1742 of 3922
After my set was calibrated i have now isf day and isf night locked settings.
post #1743 of 3922
Quote:
Originally Posted by Cinderella17 View Post

well is very strange this, but not happen all the time, is in some fast movement in the movie, I don't know it's the true motion... it could be???

Everything looked better to me when I turned Tru-Motion off.
post #1744 of 3922
Quote:
Originally Posted by Cinderella17 View Post

well is very strange this, but not happen all the time, is in some fast movement in the movie, I don't know it's the true motion... it could be???

I suppose it could be the Tru-Motion. You could shut off the Tru-Motion and see if you get the stuttering and lag. If you don't get it with Tru-Motion off, it's probably the cause of the stuttering.

I have tried to reproduce the problem and have failed. When I see the stuttering on screen I rewind the movie to replay that section where it stuttered and it won't do it again. Without turning off Tru-Motion, try this:


1. When this problem occurs rewind the movie and try to reproduce the problem. See if it happens again in the same place. If it does, then turn off Tru-Motion, rewind the movie and see if the problem goes away.

OR

2. Turn Tru-Motion off and see if you see the problem.

Again, is this when watching blu-ray or DVD's? Or is it when watching downloaded content via the USB input?
post #1745 of 3922
Quote:
Originally Posted by caloyzki View Post

After my set was calibrated i have now isf day and isf night locked settings.

Very nice. I know that your settings are unique to your room and lighting conditions but would you please share your picture settings with us?
post #1746 of 3922
Help! :-(

I have the same problem you have with the sound after firmware update. I have to turn volume up to 90 to hear anything no matter if i connect dvd player, TWC box, DVHS player, Laserdisc player. I've gone thru the menu settings with LG three times, TWC 4 times.The picture is fine. I checked all cable connections and even swapped them and even connected each one at a time to see if I could isolate problem. I have a LG 47LW6500 in master BR and it is perfect. That is why I bought the new LG55LM7600. Why doesn't LG recognize there is a problem. Others have posted same problem on this forum. Please post if you fine a fix for this mess. I understand things happen, wifes don't, on new purchases. Note: I connected my Appletv and sound is perfect on any HDMI port. figure that one?
post #1747 of 3922
while playing Uncharted 3 using ISF day.








post #1748 of 3922
Quote:
while playing Uncharted 3 using ISF day.

Love that game! 3D mode is incredibly cool. I'm only about a 1/3 of the way through it.

I think the LG7600 in Game mode is too bright. How did you get UC3 to work in ISF mode? Relabel the HDMI input from the PS3?
post #1749 of 3922
Quote:
Originally Posted by powrwrap View Post

Love that game! 3D mode is incredibly cool. I'm only about a 1/3 of the way through it.
I think the LG7600 in Game mode is too bright. How did you get UC3 to work in ISF mode? Relabel the HDMI input from the PS3?
yup, i am not using the game mode. the only thing i use now is the ISD Day and ISF Night and ISF Night 3D. im using ISF Day for my game (as per the calibrator told me).
Edited by caloyzki - 10/29/12 at 12:11pm
post #1750 of 3922
UC3 is uncharted 3. Great game. I tried the 3d mode briefly, but I wasn't too impressed.

Caloyzki,
Somebody else asked earlier, but do you think you could share your ISF setups? I could understand why you wouldn't, though, given that you probably paid a decent amount to have somebody come out and generate those settings for you.
post #1751 of 3922
Hey Guys,
I'm new to the forum. I just picked up a 55lm7600, got rid of my Samsung 46ln750 lcd from a few years ago. The capacitors went bad as they seemed to for many Samsung TV's and Samsung's unwillingness to do anything put an end to me doing business with them. I did repair the problem myself, but in the process got excited about the idea of getting a new TV and finally decided to go with this LG model. I am very happy with the set, I think the picture is great. I do have some flash-lighting issues though that I would say are medium noticeable. When I crank the dimming to high and lower the back light, it gets better, but not perfect. To be honest, I prefer brighter settings and don't feel I should need to settle on this issue for a TV at this price. The issue appears in each of the top corners and then along the sides at the bottom, right in line with where there are rear screws holding the panel in place. I finally had enough of it after watching the Dark Knight on Bluray. It just sticks out like a sore thumb now that it's on my radar. I didn't want to return the TV and enter the panel lottery, so I called LG and the agreed to send a tech out. He arrived today without prior knowledge of these issues on LED TV's. He had read about them in his bulletins from LG. LG's instructions were to disconnect video source and see if problem still existed, it did. Then take the back off to determine if the problem resided in the panel or the case/cabinet. We took the back completely off, and the issue certainly gets better when you manipulate the cabinet, it didn't appear to be a panel issue. So they are going to start with a new cabinet. Fingers crossed that this works. Does anyone else have any experience with this repair? I've read on some other threads in the past that they were replacing panels on Samsung's, etc.

Thanks for the input
Joe
post #1752 of 3922
why is my wifi setting keep disappearing when I turn off the TV. had to enter pw each time
post #1753 of 3922
Quote:
Originally Posted by caloyzki View Post

while playing Uncharted 3 using ISF day.

WOW Really great, caould you please share the settings? I haven't any good settings for my games frown.gif (also own a ps3)
post #1754 of 3922
Quote:
Originally Posted by Eric89GXL View Post

Hey folks, just wanted to pop in and let people know (if it hasn't been mentioned yet) that DirecTV remotes can be programmed using the same code (10856) to enter the engineer mode on these sets. Just program the remote like so:
http://www.ehow.com/how_8579776_make-directv-controller-control-tv.html
I also had to enter the password "0413" after hitting "3" to get to the advanced menu, although apparently it can also be "0000" sometimes:
http://openlgtv.org.ru/wiki/index.php/Access_hidden_service_menus_/_modes
This information can be used in conjunction with the previous guide on engineer mode:
http://www.avsforum.com/t/1399636/official-lg-xxlm7600-owners-thread/930#post_22236794
In any case, that saved me $20 on a RCA universal remote, so maybe it will save someone else some money, too...

Thanks for this.!
post #1755 of 3922
Hello, the pictures of Uncharted 3 look great! I am highy considering getting either the LM7600 or 6700 but have heard the LM6700 has too much lag. Does the LM7600 have lag while playing Uncharted 3? Please let me know, thanks kindly
post #1756 of 3922
Quote:
Originally Posted by caloyzki View Post

while playing Uncharted 3 using ISF day.








Hello, your pictures of Uncharted 3 look great! I am considering getting either the LM6700 or LM7600 but have heard that the 6700 has input lag. Do you experience any input lag when playing Uncharted 3 or other games? I play games so this is an issue for me. Let me know, thanks kindly
post #1757 of 3922
Quote:
Originally Posted by JordanT View Post

Hello, your pictures of Uncharted 3 look great! I am considering getting either the LM6700 or LM7600 but have heard that the 6700 has input lag. Do you experience any input lag when playing Uncharted 3 or other games? I play games so this is an issue for me. Let me know, thanks kindly

if you use the game input, no lag at all. I tried COD, battlefield, FPS
post #1758 of 3922
Quote:
Originally Posted by davivascaino View Post

if you use the game input, no lag at all. I tried COD, battlefield, FPS

Early on in the thread, somebody did an analysis that suggested the PC input label resulted in the least amount of lag.
post #1759 of 3922
Quote:
Originally Posted by JordanT View Post

Hello, your pictures of Uncharted 3 look great! I am considering getting either the LM6700 or LM7600 but have heard that the 6700 has input lag. Do you experience any input lag when playing Uncharted 3 or other games? I play games so this is an issue for me. Let me know, thanks kindly
I dont ezperienced lag. Not sure. Game is good on my set.
post #1760 of 3922
Just wanted to say I picked this up in a 55 for 1,350 plus tax at best buy the other day brand new. I actually went in to get it in a 47 but they were out of stock and because of the hurricane shipments were delayed. So they offered me the 55 for 150 more. So I took it and wow this is a beautiful TV. But I guess some best buys are nice. Oh and the 3d is sweet. Now to buy a wall mount anyone recommend one please.
post #1761 of 3922
New firmware Ver.04.20.18 is available on my set today. I am not using the engineering updates just in case anyone wants to know.
post #1762 of 3922
Quote:
Originally Posted by Truckondo View Post

New firmware Ver.04.20.18 is available on my set today. I am not using the engineering updates just in case anyone wants to know.

FYI:
I have the 8600. I do get the engineering updates and the version is also 4.20.18.
post #1763 of 3922
Quote:
Originally Posted by Truckondo View Post

New firmware Ver.04.20.18 is available on my set today. I am not using the engineering updates just in case anyone wants to know.

What benefits does that one offer? Is there a firmware version that allows dolby over optical out, or will that always require the engineering menu? I have been on the fence about whether or not I should get a universal remote because dolby over optical out is the only feature I really want.
post #1764 of 3922
Quote:
Originally Posted by beelbeel View Post

What benefits does that one offer? Is there a firmware version that allows dolby over optical out, or will that always require the engineering menu? I have been on the fence about whether or not I should get a universal remote because dolby over optical out is the only feature I really want.

no updates will enable DD sound. you need to do it manually at the service menu.
post #1765 of 3922
Quote:
Originally Posted by caloyzki View Post

no updates will enable DD sound. you need to do it manually at the service menu.

Thanks. Looks like I'm going to have to get an RCA remote at some point, then. It would definitely make my home theater system less complicated.
post #1766 of 3922
Quote:
Originally Posted by beelbeel View Post

Thanks. Looks like I'm going to have to get an RCA remote at some point, then. It would definitely make my home theater system less complicated.

If you happen to have DirectTV, that remote also works.
But, My direct TV audio is not passed through as DD. It gets downgraded to stereo. All my other signals work though.
post #1767 of 3922
Quote:
Originally Posted by boxorox87 View Post

If you happen to have DirectTV, that remote also works.
But, My direct TV audio is not passed through as DD. It gets downgraded to stereo. All my other signals work though.

I don't, unfortunately. I considered checking a few local thrift stores, one of which I remember having a DTV set top box, but a universal RCA remote is fairly cheap anyway.
post #1768 of 3922
Quote:
Originally Posted by caloyzki View Post

I dont ezperienced lag. Not sure. Game is good on my set.
\

Are there certain settings I would need to know about to make sure there is no lag? This is really the only thing holding me back from getting this tv so any information is greatly appreciated. How are you guys liking the TV's picture? Im coming from the Panasonic ST30 so I am hoping this TV delivers. thanks again
post #1769 of 3922
I successfully got my tv into engineer mode with my directv menu. I will hook up my soundbar tomorrow and am hoping for some dd passing through the optical. I set edid to ac3 as mentioned, but I noticed dts was an option too. Is ac3 still preferred? Is there anything else I should change while in engineer mode?
Thanks
post #1770 of 3922
so been playing with it and I have really bad bleeding in the top of the screen, I am so sad cause I got such a good deal but man the bleeding bright white lights are horrible, I wish I got a good one, but I am going back to plasmas for now. good luck guys.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: LCD Flat Panel Displays
AVS › AVS Forum › Display Devices › LCD Flat Panel Displays › Official LG XXLM7600 Owners Thread...