AVS › AVS Forum › Display Devices › Plasma Flat Panel Displays › Official Panasonic GT50 Series Discussion Thread [No Street Price Talk]
New Posts  All Forums:Forum Nav:

Official Panasonic GT50 Series Discussion Thread [No Street Price Talk] - Page 23

post #661 of 9036
4/28/12 at 9:54pm
Quote:
Originally Posted by Jason Bourne View Post

Originally Posted by shesheshic
sheshechic, would you mind posting some pics?
I'm a really horrible photographer but I'll give it a shot. We're going to see if we can't level the panel out tomorrow and so photos will have to wait until after that.

I don't understand why anyone expects that you can record an image of a 1920x1080 display using a sensor with a completely different resolution and then display it on a computer screen with yet another completely resolution and get any useful information out of the process. Seriously, people; think about it.

And with bad lighting conditions for almost any type photography too.
Reply
Reply

Gear mentioned in this thread:

post #662 of 9036
4/28/12 at 9:59pm
Looking at purchasing the 55 GT50 very soon and was hoping to get answers to a couple of questions:

- Can someone post measurements of the 55 inch GT50 stand (Length and width)

- Does the stand for the 55 inch set swivel?

- Last question I had was about seating distance. I want to get an immersive 2D and especially 3D viewing experience with this set. Should I look to go even bigger and aim for the 60 inch GT50 if my sitting distance is a maximum 8 feet? The Majority of my viewing will be blu ray and HD OTA channels.

Thanks!
Reply
Reply
post #663 of 9036
4/28/12 at 10:45pm
Quote:
Originally Posted by sage11x View Post


Nice view... Mine is of a parking lot!

Thanks, it's nice, but i might start to resent it if I have to get an LCD again!!
Reply
Reply
post #664 of 9036
4/28/12 at 10:49pm
Quote:
Originally Posted by sheshechic View Post


The bright room THX will help a lot during the day. If I lived in your space, I would try it out by buying it from Amazon, or some place that has a similar and easy return policy.

If 3D is important to you, then you should really try it out, since it's a personal preference. I prefer passive but find the 3D on the GT50 to be very good and like it better than Samsung's.

Thanks, that's good advice

So is THX bright room pretty effective?
Reply
Reply
post #665 of 9036
4/28/12 at 11:19pm
Quote:
Originally Posted by Jason Bourne View Post

Originally Posted by shesheshic
sheshechic, would you mind posting some pics?
I'm a really horrible photographer but I'll give it a shot. We're going to see if we can't level the panel out tomorrow and so photos will have to wait until after that.

I don't understand why anyone expects that you can record an image of a 1920x1080 display using a sensor with a completely different resolution and then display it on a computer screen with yet another completely resolution and get any useful information out of the process. Seriously, people; think about it.

I'm well aware that photographs are of little use for indicating the TV's PQ, what I'm interested in are the aesthetics of the TV itself. Excellent point, though; I should have thought about it before I asked.
Reply
Reply
post #666 of 9036
4/28/12 at 11:35pm
Quote:
Originally Posted by Jason Bourne View Post


I don't understand why anyone expects that you can record an image of a 1920x1080 display using a sensor with a completely different resolution and then display it on a computer screen with yet another completely resolution and get any useful information out of the process. Seriously, people; think about it.

I don't think anyone expects photo's of someone's TV to show top PQ. IMHO, for most I think it's just fun to see the pics of someone's new plasma and it gives people like me (who is waiting for my 55GT50 delivery any day now) something to look forward to.
Reply
Reply
post #667 of 9036
4/29/12 at 6:09am
- Does the stand for the 55 inch set swivel?

Only 50" sets have swivel stand.
Reply
Reply
post #668 of 9036
4/29/12 at 7:14am
Quote:
Originally Posted by HLdan View Post

I don't think anyone expects photo's of someone's TV to show top PQ. IMHO, for most I think it's just fun to see the pics of someone's new plasma and it gives people like me (who is waiting for my 55GT50 delivery any day now) something to look forward to.

That makes sense, it IS fun to see people's set ups. I just often see people assessing image quality off these pics and wanted to share a cautionary thought.
Reply
Reply
post #669 of 9036
4/29/12 at 7:57am
Slightly off topic. How comfortable are people using the provided tabletop stand with a 65" display? I won't have romping big dogs and won't need to get behind it, but if a breeze from the heat duct hits it I don't want to be concerned it will blow over I've been looking at a Salamander floor mount but it's pretty expensive and everything in my theater is being replaced, so I'm flat broke

Thanks.
Reply
Reply
post #670 of 9036
4/29/12 at 8:56am
Any news on the 65GT50?
Reply
Reply
post #671 of 9036
4/29/12 at 9:19am
Quote:
Originally Posted by airgon74 View Post

Any news on the 65GT50?

I went by my BB yesterday, and they have a SKU that shows the price, but they still won't let me order one (they say it messes up their inventory, because you have to order a phantom TV, then return it when it comes in, skewing the inventory/sales numbers). The guy I talked to (not my normal guy), said they hope to have them in the warehouse in a week, but we've all heard that before . . .
Reply
Reply
post #672 of 9036
4/29/12 at 9:20am
Quote:
Originally Posted by kevin_mahaney View Post

I went by my BB yesterday, and they have a SKU that shows the price, but they still won't let me order one (they say it messes up their inventory, because you have to order a phantom TV, then return it when it comes in, skewing the inventory/sales numbers). The guy I talked to (not my normal guy), said they hope to have them in the warehouse in a week, but we've all heard that before . . .

The BB SKU for the 65" GT50, by the way, is 5025207.
Reply
Reply
post #673 of 9036
4/29/12 at 9:31am
65gt50 in stock at amazon
Reply
Reply
post #674 of 9036
4/29/12 at 10:16am
Quote:
Originally Posted by threephi View Post

No fans on mine, or if there are, they are extremely stealthy.

Thanks for the quick reply.
Reply
Reply
post #675 of 9036
4/29/12 at 11:00am
Thread Starter 
Quote:
Originally Posted by Chere View Post

Looking at purchasing the 55 GT50 very soon and was hoping to get answers to a couple of questions:

- Can someone post measurements of the 55 inch GT50 stand (Length and width)

I think the stand is 20" wide by 14" deep. In the 2nd post of this thread i linked the Quick Start Guide which has line drawings with all the various dimensions shown.


Quote:


- Does the stand for the 55 inch set swivel?

No. None of the 55", 60", or 65" models swivel. You can buy a swivel platform to place the TV on"

http://www.bestvaluetvswivels.com/index.htm

http://www.bestvaluetvswivels.com/blacklcd.htm

15" x 25" for $64 http://www.bestvaluetvswivels.com/blacklcd.htm




Or just buy the swivel mechanism alone and build your own:
http://www.bestvaluetvswivels.com/bearings.htm
Reply
Reply
post #676 of 9036
4/29/12 at 11:50am
How do you guys rate the 3d of this set, crosstalk, brightness..... I had a vt30 and the 3d was good but it could have been brighter and a reduction in crosstalk would be nice.
Reply
Reply
post #677 of 9036
4/29/12 at 12:02pm
Quote:
Originally Posted by Chere View Post

Looking at purchasing the 55 GT50 very soon and was hoping to get answers to a couple of questions:


- Does the stand for the 55 inch set swivel?

Thanks!

Nope. I thought it did but apparently not...
Reply
Reply
post #678 of 9036
4/29/12 at 12:04pm
Quote:
Originally Posted by Adamd View Post

How do you guys rate the 3d of this set, crosstalk, brightness..... I had a vt30 and the 3d was good but it could have been brighter and a reduction in crosstalk would be nice.

It could be slightly brighter, but bear in mind that my tv has not been calibrated either.
Reply
Reply
post #679 of 9036
4/29/12 at 12:12pm
Quote:
Originally Posted by airgon74 View Post

Really! You are talking about speakers on a plasma..
If You care about sound get a HTIB

Read post 605 to see why some people might choose to use tv speakers in some scenarios (hint: neighbors in apartment buildings do not appreciate my surround activities).
Reply
Reply
post #680 of 9036
4/29/12 at 12:59pm
Quote:
Originally Posted by Adamd View Post

How do you guys rate the 3d of this set, crosstalk, brightness..... I had a vt30 and the 3d was good but it could have been brighter and a reduction in crosstalk would be nice.

Brightness is of course less than non-3D viewing but it was still more than adequate in a dimly-lit room. Probably unwatchable in a bright room though.

My set does show a little bit of crosstalk, but I don't know if that's typical or how bad it is compared to whatever is considered average. It's only noticeable when there is a bright object against a dark background, but in rare and extreme cases it can be distracting enough to break the 3D effect. Switching the 24p setting from 60hz to 48hz helped that a lot however.
Reply
Reply
post #681 of 9036
4/29/12 at 1:26pm
With the inherent off-axis viewing problems of LCDs and RPTVs, I can understand why people would want swivel mounts or stands, but why would that be an important feature for plasmas?
Reply
Reply
post #682 of 9036
4/29/12 at 1:35pm
Quote:
Originally Posted by adrian s View Post

65gt50 in stock at amazon

Only showing MSRP. I wonder what it actually is, all the others are around $200 off.
Reply
Reply
post #683 of 9036
4/29/12 at 1:43pm
Thanks for the reply everyone. I guess that leaves the question of size. Is the 60 inch pushing it too close for someone sitting just 8 feet away? I know you can never go too big and 3D viewing will be really immersive but I'm wondering if that's such a good thing with 2D. Again, I will mostly be watching blu ray and HD OTA Primetime so high quality sources for the most part. Dithering for example is one I'm concerned about.
Reply
Reply
post #684 of 9036
4/29/12 at 3:34pm
Does anyone know if Squaretrade Warranties cover IR/BI issues?

Have been checking online and can't find a solid answer.

Would like to have peace of mind, just in case....

not worried about movies / tv - I am worried about video games with a constant HUD.
Reply
Reply
post #685 of 9036
4/29/12 at 4:18pm
Quote:
Originally Posted by paligap View Post

With the inherent off-axis viewing problems of LCDs and RPTVs, I can understand why people would want swivel mounts or stands, but why would that be an important feature for plasmas?

Cooking....

Not everyone's tv sits in the most perfect spot.
Reply
Reply
post #686 of 9036
4/29/12 at 5:27pm
Quote:
Originally Posted by eagle_2 View Post


Read post 605 to see why some people might choose to use tv speakers in some scenarios (hint: neighbors in apartment buildings do not appreciate my surround activities).

Then get a sound bar . Tv speakers are crap.
Reply
Reply
post #687 of 9036
4/29/12 at 6:12pm
Quote:
Originally Posted by threephi View Post

Brightness is of course less than non-3D viewing but it was still more than adequate in a dimly-lit room. Probably unwatchable in a bright room though.

My set does show a little bit of crosstalk, but I don't know if that's typical or how bad it is compared to whatever is considered average. It's only noticeable when there is a bright object against a dark background, but in rare and extreme cases it can be distracting enough to break the 3D effect. Switching the 24p setting from 60hz to 48hz helped that a lot however.

I find that 48hz is unwatchable with the flicker. Even 60hz can be noticeable when looking out the corner of your eyes. Six years ago I could only use 100Hz CRT monitors because 60Hz bothered me. This is the only thing LCD TV's and Monitors have over CRT and Plasmas IMO.
Reply
Reply
post #688 of 9036
4/29/12 at 6:39pm
Quote:
Originally Posted by mnc View Post

Only showing MSRP. I wonder what it actually is, all the others are around $200 off.

In Best Buy's system, it is showing $300 less than MSRP.
Reply
Reply
post #689 of 9036
4/29/12 at 6:41pm
Quote:
Originally Posted by mcbiidermen View Post

Does anyone know if Squaretrade Warranties cover IR/BI issues?

No. They will warranty only what the manufacturer warrants.
Reply
Reply
post #690 of 9036
4/29/12 at 8:30pm
I have noticed lately that if I have a light on directly in front of my GT50 that the reflection goes from the top of the screen to the bottom but the images are green and red above and below the white lights reflection image. Kind of hard to explain. I'm guessing this has something to do with the black filter or the anti reflection film? Not really an issue for me since I usually don't have this light on.
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Plasma Flat Panel Displays

Gear mentioned in this thread:

AVS › AVS Forum › Display Devices › Plasma Flat Panel Displays › Official Panasonic GT50 Series Discussion Thread [No Street Price Talk]