Hopefully you guys can help me out here. Im running a vaio laptop with an nvidia gt540m gpu. I use mpc-hc with lav and madvr along with pdvd11 for my 3d needs. I connect to my mits dlp wd73835 through my integra dtr 80.3 avr via hdmi from the vaio. When viewing the pluge pattern on the avs709 disc i see two different results based on what i set the video output to in either madvr or pdvd11. When i use 16-235 i see all the bars flash a light grey. When i use 0-255 i can barely see bar 19 flash and then above 19 seem to flash normally. For this pattern to be "correct" i should see bar 17 barely flash like i achieve with my ps3. Regardless of 16-235 or 0-255 i cannot achieve this from my laptop. Im assuming the 0-255 is closer to being correct but will crush blacks a bit vs the 16-235 that will wash out blacks. Am i correct in my thinking or does anybody have any ideas or advice on how to properly set black level with this configuration? Thanks!
post #1 of 3
4/6/12 at 4:42am