Originally Posted by DaGamePimp
Well new issues, not sure what's going on now.
Reads are bouncing all over the place on any color with i1Pro/i1D3 CalMan 4.6.2 when doing Panasonic AE4000 projector (figured it might be the HiPower screen so tried pointed at PJ with diffuser but makes no difference). Sometimes the reads will come in quick succession and then it will slow to a crawl and take 15 seconds to get a single read.
Also noticed the i1D3 will not allow me to use the diffuser when pointed at the PJ, it throws an error and says it cannot be used.
Reads from the screen with i1D3 shows almost no movement when making adjustments.
Never seen anything like this...
You sure you are not using the simulated meter?
If you disconnected either meter from a running instance of Calman you need to close and reopen calman. Probably not the issue but it has happened to me in the past.
If closing calman, reopening, searching for meters and then you get the same thing, post in on the spectracal site.
One other question, how long is the USB cable you are using..
To help spectracal trouble shoot this, put up a pattern that is causing the most problem, then go to the precal screen and hit the auto read button. This will take all the reading at the one stimulus so they can compare how they are bouncing around.
If you need an older release to try, I have most of them and can post whatever version you want to try.
any chance it is the lamp flickering just to fast for you to see? Try high lamp if you have not tried it yet..