or Connect
AVS › AVS Forum › Display Devices › Plasma Flat Panel Displays › Panasonic TH-58PZ700U - No Video Signal - Full Green Bars on Some Inputs
New Posts  All Forums:Forum Nav:

Panasonic TH-58PZ700U - No Video Signal - Full Green Bars on Some Inputs

post #1 of 4
Thread Starter 
Hello,

I am in need of some direction. I have a Panasonic Plasma (TH-58PZ700U) that's not accepting video input after a thunderstorm.

The Composite AV inputs will show green bars (sometimes horizontal, sometimes vertical (see attached picture)) or black with white spots. Regardless of a device being connected.

All other inputs show no signal

The OSD's work fine.

The H board has already been tested with a spare. It made no difference.

I think one of the D* boards needs to be replaced. I would guess the DG, but I'm not sure.

Am I on the right track? Which board is most likely the culprit?

Thanks in advance!



post #2 of 4
This should help.

http://www.scribd.com/doc/88855992/Th42pz700a-Training
post #3 of 4
Thread Starter 
Thanks
post #4 of 4
I have the same problem.Did you ever figure out the correct fix. Thanks
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Plasma Flat Panel Displays
AVS › AVS Forum › Display Devices › Plasma Flat Panel Displays › Panasonic TH-58PZ700U - No Video Signal - Full Green Bars on Some Inputs