or Connect
New Posts  All Forums:Forum Nav:

Need help urgently lost sound

post #1 of 18
Thread Starter 
I have lost sound in my left channel any idear why that's happend?
post #2 of 18
Quote:
Originally Posted by Bryceo View Post

I have lost sound in my left channel any idear why that's happend?

Trouble shoot man.

Try hooking that speaker up to a different channel first.

Then trace every other step after that. Then post back.
post #3 of 18
Thread Starter 
I did that it worked fine changed the Cabbles and it still didn't work
post #4 of 18
does it do it on all sources?
post #5 of 18
Thread Starter 
Yes it does
post #6 of 18
Doesnt sound good.

Have you ran a pink noise test? If that channel fails to play the test on any of the speakers then sounds like a bad channel on the AVR
post #7 of 18
Thread Starter 
I did run that's test and all the channels worked fine it's just the left side isn't picking up any input from optical RCA or hdmi
post #8 of 18
Quote:
Originally Posted by Bryceo View Post

I did run that's test and all the channels worked fine it's just the left side isn't picking up any input from optical RCA or hdmi

So it plays when run the test?
post #9 of 18
Thread Starter 
Yeh, witch is Probley a god save in its self, just dosnt get signal
From any other channels or input selectors
post #10 of 18
Thread Starter 
It's being difficult it now will not play the test tone out of the left channel
post #11 of 18
Quote:
Originally Posted by Bryceo View Post

It's being difficult it now will not play the test tone out of the left channel

If it wont play a test tone I would think that something caused that channel to go bad. Most AVRs carry a 1 yr warranty at minimum so I would take it back to where you bought it and go from there.
post #12 of 18
Thread Starter 
I've hadmy reciver for a lot longer then one year is there any way I can have a Play with out destroying the amp completely
post #13 of 18
Thread Starter 
Can I buy pass that channel with another reciver?
post #14 of 18
Depends on what receiver(s) you have. I use my receiver as a pre-amp only taking the signals to a separate amp. If your receiver in question has direct RCA plug inputs for all channels you can probably take the pre-amp outputs from one receiver and use the analog inputs of the second. You never told us if your diagnostic included swapping speakers around Left for Right.

If the the left channel amp in the receiver in question is bad your piggy back arrangement won't help.
post #15 of 18
This doesn't sound like a question that would be asked by someone familiar with pink noise. I smell post count building.
post #16 of 18
Quote:
Originally Posted by Neurorad View Post

This doesn't sound like a question that would be asked by someone familiar with pink noise. I smell post count building.

First 83 posts in 11 days, ya think???
post #17 of 18
Thread Starter 
No that's an asumpshion witch I don't appriceate, I've tried a few diffrent things for this and it will not pick up a signal in any of the inputs only on the left side, I swapped the left speaker over with the right speaker and the left speaker that was plugged in to the right channels worked the right speaker in the left channel did not work, how's that any idears as to why this happens I did nothing diffrent I put a movie on and all the sound was coming from the right side..
post #18 of 18
Thread Starter 
So I had my local tech come out today, and he was hear
For about 40 45 minutes and he pulled the casing off had a fiddle and it come back online all channels working again left channel fixed, it went offline due to a fault it the soldering from the factory
New Posts  All Forums:Forum Nav:
  Return Home