Progressive scan does not work on my CRT TV

Hello.

I have Samsung CRT model CL-21Z57MQ. I bought 2 years ago approximately.

The problem is that the input component does not work. This came from the factory.

I have tried various component devices PS2, Xbox 360, etc.. I plug it in and it looks good without any problem, but if I put it in progressive mode. The screen is divided in two and the same thing twice and so distorted and altered colors. You can not see almost nothing of the image.

So before you buy another CRT. I'll do my best to fix this. It's a shame, because everything else works perfectly and is also new.

By the way. Enter the Service Menu and set the factory defaults. It did not work. Do not change anything else.

I hope you can help me, thanks.

PS: Sorry my English is not my first language.

Yes. Already established the progressive scan option in the bios of the consoles.
Sure, I'm using the component cable for each console specific (red, green and blue)

Connect the consoles to my TV LCD HD ready and is progressive scan works perfectly.

Yes have progressive scan function. He says in the manual and also has the component input for that function.

If you're right. 5 minutes ago check the back of the TV and next to the component input 480i says in fine print. I know that my TV is not compatible now.

Also thanks for the information.

The big problem now is that before reviewing the entries. Place the service menu and started to change a parameter CL video that said, I guess refers to the model of TV.
As you begin to change from CL to CM, CQ, CZ. The latter the tv is was shut down.
I light it up, but shuts off in 1 or 2 seconds.

The solution is easy in theory, change the parameter back to CL. The problem is that doing in a second, is impossible.

What do you recommend?

Okay but how I can fix the problem?

I turn on the tv on and off in 2 seconds. He was also lit in service menu, but shuts off after 2 seconds. By which I can not change the setting back to CL in just 2 seconds.

If have it. It is entered by pressing Mute, 1, 8, 2, Power. The problem is that it appears the service menu and also turns off after 2 seconds. So I have no time to change the setting.

So any option through the service menu is ruled out for now.

It is a very serious problem I have now ...

Will there be any way to restore the factory settings with the TV off, pressing a button sequence?

I guess not ... But you never know.

Investigated in another forum and got the solution. You have to reprogram the eeprom. So unfortunately I have to take it to a technician.

So you can take the item closed.

Also thanks for the help.