I have seen at past a Modification of a RadioShark Multimeter #22-811 that can measure display Hz, i have contact anyuser (from youtube) to give me some connection diagram with no luck, unfortunately Bogney Baux user (from AVSForum) is not an active user anymore, can someone give more details about the wiring and parts that needed to assemble it.
Klein K-10 has that Measuring Hz feature, Chroma 5 with CalMAN can read Hz only from CRT displays, this DIY Mod will be a cheap way to measure Hz for checking how each display is actually working using different selected motion options.
Here are the links of that Mod measuring a KURO:
''Measuring the refresh rate of a Pioneer Kuro PDP-5020 FD using a RadioShack multimeter #22-811 attached to a simple circuit consisting of a light dependent resistor wired in series with a 2000 ohm resistor and a 9 volt battery. ''
http://www.youtube.com/watch?v=_Hmmb-RCfII
http://www.youtube.com/watch?v=vmPP-CwzHTQ
Klein K-10 has that Measuring Hz feature, Chroma 5 with CalMAN can read Hz only from CRT displays, this DIY Mod will be a cheap way to measure Hz for checking how each display is actually working using different selected motion options.
Here are the links of that Mod measuring a KURO:
''Measuring the refresh rate of a Pioneer Kuro PDP-5020 FD using a RadioShack multimeter #22-811 attached to a simple circuit consisting of a light dependent resistor wired in series with a 2000 ohm resistor and a 9 volt battery. ''
http://www.youtube.com/watch?v=_Hmmb-RCfII
http://www.youtube.com/watch?v=vmPP-CwzHTQ
