Official Samsung UNXXES7100 Thread. - Page 58

Originally Posted by axm438 

when you refer to the leds, are you referring to the keys? or are you referring to the small display on the qwerty side? I always thought Samsung uses these model numbers interchangeably.

Originally Posted by axm438 

So you're using it now with you es7100? and the qwerty keys work in smart hub? any issues with pairing over bluetooth? Can you do me a favor and see if you see a model number anywhere on the remote? thanks in advance.

Originally Posted by PiratesCove 

My Current Settings:

http://www.avsforum.com/t/1414638/official-samsung-unxxes7100-thread/1320#post_22789840

Originally Posted by glaesemann 

PiratesCove: great settings, much improved in everyway except I'm getting nasty soap opera effect. Did I miss a setting or is this your preference? - Tim

Originally Posted by glaesemann 

PiratesCove: great settings, much improved in everyway except I'm getting nasty soap opera effect. Did I miss a setting or is this your preference? - Tim

Originally Posted by PiratesCove 

I have no Soap Opera Effect...

Set Auto Motion Plus: Off.

Originally Posted by axm438 

yeah....I'm just trying to confirm before I go out to buy one. BB said the ssg-3100gb 3D glasses wouldn't work. took a chance anyways and bought a pair and sure enough they worked on the es7100. Just trying to see if its the same scenario with the remote also.

Originally Posted by lickwid 

Can you confirm that you have the SSG-3100GB glasses (made for the 2011 Samsung models), and it works with the UNXXES7100 series? I can get the ones that came with the TV to work perfectly, but when I tried the SSG-3100GB (http://www.amazon.com/Samsung-SSG-3100GB-Active-Glasses-Compatible/dp/B004PYEBY8), they just keep flashing red. I thought the 2012 glasses are backwards compatible, but the 2011 glasses are not forward-compatible? Thanks in advance.

Found this page: http://skp.samsungcsportal.com/integrated/popup/FaqDetailPopup3.jsp?seq=443911&cdsite=uk

I guess I'll give it another shot tonight. I should just have to press the power button and it should automatically sync? Or I am missing something?

Originally Posted by axm438 

Yes I have two SSG-3100GB and they do work with the es7100 model. They work perfectly on my TV. Make sure you turn on your 3D mode on the tv 1st. Then Hold down the power button on the glasses until you see on your tv that the glasses are detected by the tv. That should be it and you should be synced over bluetooth.

Originally Posted by Danediz 

How come no dynamic contrast with your settings??

Originally Posted by Capone Dillon 

Noob question here , Just bought the 7100 after looking at the LG that was similar . The guy at best buy assured me it had the dual view to play split screen games , full screen with glasses . I tried that and saw that if you close one eye it will work . Looked around to see if you need special glasses and have not been able to find anything . Is this a useless feature or am I missing something ? I searched around in this thread but I may have missed it out of the 58 pages . Thanks in advance

Originally Posted by andyboy 

How come everyone's contrast is set so high? I know it's your preference, but I got mine set to 70. Doesn't the high contrast make everyone's eye hurt?

Originally Posted by lickwid 

Thanks, I appreciate it. I only tried them a few times and gave up. After doing some searching, read it was only compatible for 2011 TV's, I gave up. I like it more than the 4100 glasses since they don't let in as much light from the sides.

Originally Posted by Hooterville 

Is the latest firmware update (1026.1) safe?

Originally Posted by markc72 

Here is what it fixes.

This firmware is for TV Model(s):EH4500 / EH5300 / ES6100-7150
The version is 1026.1
This firmware update will improve the following:

- Support Verizon Apps

- Support Netflix 3.2 codec

- Resolves picture shaking and line noise on 1080p source.

- Supports Yahoo SyncPlus app..

- Resolves escaping issue while watching movie on VUDU.

- Resolves issue Cinemanow does not play certain title.

- Resolves compatibility issue with DLNA devices.

- Improves picture quality.

- Supports Samsung wireless Audio Dock

- Solves the problem closed caption does not show.

Originally Posted by Twitch1977 

I got my set this past weekend and I'm very happy with it, I'm hoping you guys might be able to shed some light on some weird TV/Receiver interactions. It's like the TV never remembers the settings to enable the Audio Return Channel.

Every time I start the TV up I need to go to Options - System - Anynet and turn Receiver to 'On', and then go into Sound - SPDIF Output and set it to Dolby Digital or DTS once I have a source playing through All Share or Netflix. Isn't there some way to make these settings permanent? If anyone could help me out on this it would be greatly appreciated. Maybe there is just a save settings button I'm missing somewhere. And even once these settings are set it's a crap shoot if I get the sound inside the tv menus when cursoring around. It seems any time I want anything from the ARC I need to mess around with it for 5 or 10 minutes before anything works. This has easily been the most frustrating thing for me with this TV.

Also I've heard a lot about the settings in post 640, are these considered a good baseline for this TV or has the consensus been reached on a different set of settings? I don't need something perfect, just something to improve on the out of the box video settings. Thanks!