or Connect
AVS › AVS Forum › Audio › Receivers, Amps, and Processors › Integra 40.2 DTR, multi-channel not working
New Posts  All Forums:Forum Nav:

Integra 40.2 DTR, multi-channel not working

post #1 of 4
Thread Starter 
I have an integra 40.2 DTR and a Samsung HD-841 DVD/SACd player and am trying to listen to some multichannel 5.1 music.

I hooked up all six channels of the analog output from the player to the 5.1 inputs in the back of the receiver but all I can get is stereo. I am using the BD/DVD Input.
I want to get 6 channel analog sound.
I tried playing both a SACD and a DVD-Audio disc but both are stereo.

Is there an option in the receiver to select this? I can't seem to find it anywhere.
post #2 of 4
Have you checked the analog audio out settings in the players menu?
post #3 of 4
Thread Starter 
I will confirm this setting and report back.
Assuming the player is set to send out the music in 5,1 in the setup menu, should the receiver automatically recognize this and switch to 5.1 analog mode?
post #4 of 4
Thread Starter 
I found the solution. On the receiver, set it to BD/DVD input, press the home button on the remote, go to audio, scroll down to the Audio Selector option and select multichannel instead of HDMI.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Receivers, Amps, and Processors
AVS › AVS Forum › Audio › Receivers, Amps, and Processors › Integra 40.2 DTR, multi-channel not working