Originally Posted by 3FingeredGlove
These codes are all device 7E (126 decimal). The Comcast remote can't send these codes unless one programs it with a JP1.3 interface cable. Codes beginning with 7A (122 decimal) can usually be sent with the Comcast.
OK, so as i won't be getting an interface cable, and I have done some further research, it looks as though using Standard Codes for the various "DSP Program # Toggle" might work for me. Assuming that I am on the right trail, I've gone to the Yammy 800 manual and have looked up what the DSP numbers refer to (pages 55-58) and if I am right, it does appear that that I can give you the Standard Codes for the actions I want.
FUNCTION (DSP Prog #) CUSTOM CODE DATA CODE
6 ch toggle 7 A 8 7
Entertainment toggle (#5) 7 A 8 C
TV Sports toggle (#6) 7 A 8 D
Movie Theatre 1 toggle (#8) 7 A 8 F
Movie Theatre 2 toggle (#9) 7 A 9 0 (zero)
Dolby/DTS Surround (#10) 7 A 9 1
Most likely I will be applying these codes to the numbered buttons on the CC RC. But, once again, as these buttons already function (but not what I want), I would imagine that I would have to undo them first before installing the new codes. Is my method of doing this, as noted in the post above (post #5), correct? Or, can I simply overwrite the existing codes?
EDIT: Being antsy, I figured that I would try to do this myself. Googled a hexa to decimal converter and converted the wanted functions into decimal...I think I did it right. For example, I got 31373 for TV Sports and 31376 for Home Theater 2. However, when plugging these codes into unused button and used buttons that I unlocked, I kept getting the same response from the Yammy no matter which button pressed: Toggled between Spectacle and Sci-Fi, which functions under Home Theater 1. I'm now at a loss...Edited by flycaster - 7/14/12 at 12:43pm