AVS › AVS Forum › Display Devices › LCD Flat Panel Displays › SHARP Aquos 80LE844U Settings Thread
New Posts  All Forums:Forum Nav:

SHARP Aquos 80LE844U Settings Thread

post #1 of 3
Thread Starter 
Ok, I'm tired of searching owners thread looking for settings and just reading about settings for the 80LE632 model.

Let's list the settings for the 80LE844Umodel.

Thanks.

Nick Ninja
post #2 of 3
Thread Starter 
from TEACHSAC

2D Settings: I chose movie mode because it keeps the whites. These settings should get someone close to where they want to be without paying for a calibration.

OPC: off
Backlight: -6
Contrast: +28
Brightness: +2
Color: -5
Tint: +2
Sharpness: 0
CMS Hue, Saturation, Value: Default (for now)
Color Gamut Range: Expanded (especially for BD)
Color Temp: Mid-low
Motion Enhancement: 120 Hz Low
Quad Pixel Plus 2: Advanced (See no difference off or on)
Active Contrast: Off
Gamma: 0
Film Mode: Off (causes trails on)
DNR: Off
Monochrome: Off
Range of OPC: N/A when set to off

3D settings:

Sorry. I had to put a disc in.

Mode: Standard (3D)
OPC: Off
Backlight: -2
3D Brightness Boost: Middle
Contrast: 32
Brightness: 0
Color: 0
Tint: +2
Sharpness: +1 (may try different settings)
CMS Hue, Saturation, Value: Default
Color Temp: Standard 3D
Quad Pixel Plus 2: Advanced
Active Contrast: Off
Gamma: 0
Film Mode: Off
DNR: Off
Monochrome: Off

S~
post #3 of 3
Thread Starter 
FROM CNET.

I USED THESE SETTINGS AS A STARTING POINT FOR MY 80LE844U BECAUSE THIS HAS THE QUATTRON YELLOW PIXEL. I FIND THE COLOR TO BE MUTED AND THE MOVIE MODE TO BE KINDA DIM. I LIKE MY PICTURES TO HAVE A LITTLE MORE POP.



Sharp LC-70LE732U picture settings

by katzmaier CNET staff - 7/26/11 12:40 PM

Review:
http://reviews.cnet.com/flat-panel-tvs/sharp-aquos-quattron-lc/4505-6482_7-34477615.html

Related products:
Sharp LC-70LE733U
Sharp LC-70LE734U
Sharp LC-70LE735U

Calibration report using these settings:
http://scr.bi/rt2XxJ

Below you'll find the settings we found best for viewing the Sharp LC-70LE732U in a dim room via the HDMI input at 1080p/24 resolution. Your settings may vary depending on source, room conditions, and personal preference. Check out the Picture settings and calibration FAQ for more information.
http://news.cnet.com/8301-17938_105-9996461-1.html

--Picture Settings menu

AV MODE: MOVIE
OPC: Off
Backlight: +12
Contrast: +30
Brightness: 0
Color: 0
Tint: 0
Sharpness: 0

--Advanced sub-menu

C.M.S. -Hue
R: 0
Y: 0
G: -5
C: +6
B: -1
M: +2

C.M.S. -Saturation
R: 0
Y: -1
G: -6
C: 0
B: -9
M: -2

C.M.S. -Value
R: +2
Y: 0
G: +3
C: +4
B: 0
M: 0

Color Gamut Range: Standard

Color Temp: Low
R Gain (LO): -3
G Gain (LO): -3
B Gain (LO): -3
R Gain (HI): +1
G Gain (HI): -5
B Gain (HI): -4

Motion Enhancement: 120Hz High
Quad Pixel Plus: On
Active Contrast: Off
Gamma Adjustment: 0
Film Mode: Off
Digital Noise Reduction: Off
Monochrome: Off
Range of OPC: [any]
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: LCD Flat Panel Displays
AVS › AVS Forum › Display Devices › LCD Flat Panel Displays › SHARP Aquos 80LE844U Settings Thread