Originally Posted by nflguy
The HDMI that connects from the 1030 to the projector (30ft ultra slim redmere from monoprice) would only display 1080i, and 720p. It was replaced with an "ultra" 25ft HDMI cable my installer picked up. It displays 1080p but the cable can't be plugged in all the way at the Avr otherwise if its plugged in tight the picture is snowy/distorted and the image and audio blink on and off.
It's a brand new Sony bluray player I picked up at Costco a few weeks ago.
I have the same AVR in the livingroom connected with an older HDMI cable. The picture is fine when watching 1080p but the audio is out if synch. Install thinks new HDMI will fix.
Ok - good luck. Strange....have you tried a different hdmi slot? Also - make sure you have the latest firmware for the avr and not sure if you can do that for the projector also.
I have the new sony s3100 and send it to the str-dn1030 hdmi. There is an option on my blu-ray to change the timing with any sync issues. Works great.
Since you have 2 of the same str-dn1030's, have you tried swapping the unit from your living room? If the same problem occurs with the living room avr (which you know works), you will then know it's not the avr but the cable or possibly the projector.
If the problem is solved by this - you will know it's the hdmi on the first avr.Edited by eah9 - 8/5/13 at 10:27am