New Posts All Forums:Forum Nav:

Help with Speaker Hz settings.

post #1 of 3

8/3/12 at 7:31pm

Thread Starter

2 Posts. Joined 8/2012
Select All Posts By This User

I have a Denon AVR-1513 with Polk T15 bookshelf / Polk PSW10 Sub / Polk CS18 center and was wondering if anyone could help me fine tune my reciever. I'm new to having a system and not sure where to set the Hz for each speaker. Also I was a bit confused on the LFE setting and where to set that. Any help would be great!

post #2 of 3

8/4/12 at 9:09am

m_vanmeter
Trader Feedback: 0
WD4JCM
offline

5,317 Posts. Joined 2/2006
Location: Georgetown, KY
Select All Posts By This User

low end of the Polk T15's is 60 Hz, so I would set the crossover at 80 Hz
I could not find the specs for the CS18, so just start with the same 80 Hz
PSW10 runs 35 Hz to 200 Hz, so I would start at a setting of 120 Hz or higher

You can experiment with the settings, every setup is going to respond differently depending on location and room acoustics

post #3 of 3

8/4/12 at 10:52am

Thread Starter