or Connect
AVS › AVS Forum › Display Devices › Screens › Epson 8350 Screen Help
New Posts  All Forums:Forum Nav:

Epson 8350 Screen Help

post #1 of 3
Thread Starter 
Hello all,

I am new to all of this and I desperately need some advice to a good screen for my home theater set-up. I have been doing some research and am now more confused than when I started. Here is my set-up so far...

Projector: Epson 8350
Projector Mounting: will mount on my back wall. Wall is about 16-17 feet back. Projector will be mounted about 6 ft up on the wall (we have a 9 ft. Ceiling height). Mounting angle will be no more than 20 deg off center.
Screen Wishes: want around 110" screen. Budget - around $250 if possible.
Room: living room with some ambient light (2 windows plus light from adjacent rooms - open floor plan). Walls are tan ceiling is white. Viewing angle is no more then 30 deg.
Primary projector use: Sporting events and movies. I am not a super picky person, but I want something that will give me fairly decent quality.

Any advice would be much appreciated. thanks!
post #2 of 3
Thread Starter 
No suggestions? I think I've decided to go with a high contrast gray screen, around .8 gain or so. Hope this will be enough. Any suggestions for a good hc gray screen?
post #3 of 3
Thread Starter 
Screen needs to be manual pull-down (or electric if one fits into my budget)
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Screens
AVS › AVS Forum › Display Devices › Screens › Epson 8350 Screen Help