AVS › AVS Forum › Display Devices › Rear Projection Units › Sony SXRD Help
New Posts  All Forums:Forum Nav:

Sony SXRD Help

post #1 of 2
10/8/12 at 11:54am
Thread Starter 
First post here!!! I just installed a rebuilt light engine for a KDS60A2000, which had a failing blue sxrd panel resulting in the green blob. After install I noticed the picture had a lot of blue. Especially in the darker areas. Changing the settings in the tv menu helped a little, but there is still too much blue. Does anyone know of a setting in the service menu that may help? Like a brightness/contrast setting or red green blue levels?

Thanks for the help.
Reply
Reply

AVS Top Picks

post #2 of 2
10/8/12 at 1:32pm
The blue bias is obviously way too high. There are more aggressive bias and gain controls within the service menu vs the user menu ramps.

Your set needs to be completely recalibrated. Be wary of having a go at it yourself, you'll never get things right without proper equipment/experience.

I'd offer to calibrate your set if you were local, but highly doubt it.

Good luck.
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Rear Projection Units

AVS Top Picks

AVS › AVS Forum › Display Devices › Rear Projection Units › Sony SXRD Help