Pioneer-SC-27 Troubleshooting

Subscribe Search This Thread

Start a New Thread

post #1 of 6

10/12/12 at 2:15pm

Thread Starter

5 Posts. Joined 10/2012
Select All Posts By This User

i have a pioneer SC-27 Receiver, the ADVANCED MCACC flashes but receiver will not turn on. We have had power failure.
I've bought the receiver in Houston USA through a friend, but don't have a pioneer service close where I live in Africa.
Can someone give a hint to allow an electronic engineer ( a friend of mine) dig into the receiver???
Thks

post #2 of 6

10/12/12 at 6:17pm

4,290 Posts. Joined 2/2010
Location: Monument CO
Select All Posts By This User

First unplug the unit for about ten minutes, then plug back in and power it up. If that fails, try a factory reset -- see the owner's manual or search the main SC-27 thread here on AVS. That might fix the problem.

post #3 of 6

10/24/12 at 4:08pm

Thread Starter

5 Posts. Joined 10/2012
Select All Posts By This User

It didn't work. thanks anyway.

post #4 of 6

10/25/12 at 4:45am

7,072 Posts. Joined 6/2003
Location: metro Atlanta
Select All Posts By This User

Try this -

During Standby mode, simultaneously press and hold the DOWN and ZONE2 ON/OFF keys for 2 seconds.

These buttons will be on the front panel. This is the amp error release procedure for the ice amp models. If this doesn't work, then a trip to the service ctr is in order.

post #5 of 6

10/25/12 at 6:27am