AVS › AVS Forum › Audio › Home Theater In A Box › how to get TV audio to home theater using HDMI cable
New Posts  All Forums:Forum Nav:

how to get TV audio to home theater using HDMI cable

post #1 of 10
11/28/12 at 8:43am
Thread Starter 
Hello,

My tv has HDMI in port and don't have 3.5 mm jack. Home theaters has hdmi in and hdmi out ports. I want my tv channels audio out comes through home theaters using hdmi converter cable.

Is it possible to my TV channel audio output comes through home theater ?

Best & Regards,
Rajani
Reply
Reply

AVS Top Picks

post #2 of 10
11/28/12 at 8:50am
Look on the back of your TV for an optical output. There should be at least one optical input on your receiver(home theater). I'm guessing the TV and receiver do not have ARC.
Reply
Reply
post #3 of 10
11/28/12 at 8:59am
Quote:
Originally Posted by rajanis View Post

Hello,
My tv has HDMI in port and don't have 3.5 mm jack. Home theaters has hdmi in and hdmi out ports. I want my tv channels audio out comes through home theaters using hdmi converter cable.
Is it possible to my TV channel audio output comes through home theater ?
Best & Regards,
Rajani

Are you using a set top box for HD Cable or Satelite??? If yes, then run an HDMI from the HD box into the receiver and then an HDMI from the receiver into the TV.
Reply
Reply
post #4 of 10
11/28/12 at 9:11am
...or, you can connect your cable box to the Cable/OTA input of your tv using a coax cable. That way, your tv's ATSC tuner (I'm assuming it has one) is used and you can output 5.1 audio (if the programming has it) to the receiver using an optical cable (turning off the tv's speakers first). You just need to make sure that you select the correct input on the receiver (optical/tv).
Reply
Reply
post #5 of 10
11/28/12 at 9:32am
Thread Starter 
Quote:
Originally Posted by rajanis View Post

Hello,
My tv has HDMI in port and don't have 3.5 mm jack. Home theaters has hdmi in and hdmi out ports. I want my tv channels audio out comes through home theaters using hdmi converter cable.
Is it possible to my TV channel audio output comes through home theater ?
Best & Regards,
Rajani

Quote:
Originally Posted by tre74 View Post

Look on the back of your TV for an optical output. There should be at least one optical input on your receiver(home theater). I'm guessing the TV and receiver do not have ARC.
yes mt tv and home theater don't have ARC...
Reply
Reply
post #6 of 10
11/28/12 at 9:36am
Thread Starter 
Thank you for information... I am using HD cable... I need TV channel audio output ( ex : cricket match audio) comes through home theaters speakers....
Reply
Reply
post #7 of 10
11/28/12 at 8:09pm
Quote:
I am using HD cable...

Does that mean you have a cable box or not? And what model TV do you have, I would think all of them have a optical output by now.
Reply
Reply
post #8 of 10
11/29/12 at 3:53am
Thread Starter 
I don't have cable box. i am using local cable channel. My TV model is Toshiba Regza 32HV10 LCD TV (this is basic model, no USB option also and one HDMI in port ).
Reply
Reply
post #9 of 10
12/4/12 at 11:11pm
Thread Starter 
I don't have cable box. i am using local cable channel. My TV model is Toshiba Regza 32HV10 LCD TV (this is basic model, no USB option also and one HDMI in port )
Reply
Reply
post #10 of 10
12/5/12 at 8:19am
According to the manual your TV doesn't have a an optical out or stereo outputs at all.
http://www.regza-asia.com/pdf/HV10/19-24-32HV10Series-OM.PDF

Single HDMI input
component input with stereo audio jacks
composite input with stereo audio jacks

no audio outputs at all.

this must be an older LCD tv?

since you don't have a cable box or anything I don't see a way to connect the TV to your receiver.
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Home Theater In A Box

AVS Top Picks

AVS › AVS Forum › Audio › Home Theater In A Box › how to get TV audio to home theater using HDMI cable