or Connect
AVS › AVS Forum › Audio › Subwoofers, Bass, and Transducers › KLIPSH RW12D SETTINGS
New Posts  All Forums:Forum Nav:

KLIPSH RW12D SETTINGS

post #1 of 8
Thread Starter 
hi have a klipsh rw 12 and watch mostly movies with it. which setting should i have it on flat punch or depth.i read some people say for movies use depth others say use flat setting. which do you think is best
post #2 of 8
Most seem to use punch for music and depth for movies.
post #3 of 8
READ THIS http://www.avsforum.com/t/1390563/klipsch-rw-12d-omnimic-frequency-response-graphs.


It seems like DEPTH might be the best setting, as its the Flattest response.
post #4 of 8
I just got this and wanted to run the Audyssey on my Denon AVR-888. The manual says to defeat the volume. Does this really mean that I should completely reduce the volume on the digital display?
post #5 of 8
Quote:
Originally Posted by pghflyer View Post

I just got this and wanted to run the Audyssey on my Denon AVR-888. The manual says to defeat the volume. Does this really mean that I should completely reduce the volume on the digital display?
Set volume to 0 to start.
post #6 of 8
Thanks much Mr. Bond
post #7 of 8
Would that be the same for my pioneer vsx MCACC setup? Turning the volume down to zero on my klipsch rw12d? I turned it down to about 25% when I ran it.
post #8 of 8
Quote:
Originally Posted by Mikeclough24 View Post

Would that be the same for my pioneer vsx MCACC setup? Turning the volume down to zero on my klipsch rw12d? I turned it down to about 25% when I ran it.
Yes. The rw does not display %. Please be specific for the best help. Start at 0.
New Posts  All Forums:Forum Nav:
  Return Home
AVS › AVS Forum › Audio › Subwoofers, Bass, and Transducers › KLIPSH RW12D SETTINGS