AVS › AVS Forum › Audio › Home Theater In A Box › Official Samsung HT-E6730W / HT-E6750W Owner's Thread
New Posts  All Forums:Forum Nav:

Official Samsung HT-E6730W / HT-E6750W Owner's Thread

post #1 of 19
1/7/13 at 10:30pm
Thread Starter 
Only difference between HT-E6730W / HT-E6750W is the later has a tall boy surround speakers in AU market, while E6730W in US market with only small surround speakers.

Pros:
  • Good Sound quality when turned on 3D sound option (High/Medium/Low) to activate Simulated 7.1 channels
  • Wireless Surround Speakers can pick up signals with no delays
  • Vacuum tubes which boosts up sound performance


Cons:
  • Audio Sync (Lip Sync) option only works for Bluray Source, It doesn't adjust the sound delay for Optical / Digital Input, Neither for the Direct Media File playback from the Front USB panel. (To be Confiemed), Hoping Samsung will have a firmware update to solve this issue.
  • Not a true 7.1 channel system, does Not support "Dolby Pro Logic IIz". Samsung implement its own "3D Sound" feature, which has the same spec as "Dolby Pro Logic IIz" adding extra two channel to the front top speakers. Maybe they are trying to cut down the cost by not paying for the extra Dolby license fee.
  • No Direct input Source button / IR command; this makes Universal Remote (such as Logitech Harmony) have to run through a Source Cycle, Most of the time it will not reach to the desired source input due to timing, fine tune is needed.


Please feel free to add your opinions here.
Edited by MickeyJC - 1/7/13 at 10:36pm
Reply
Reply

AVS Top Picks

post #2 of 19
1/16/13 at 10:16am
I bought this set on boxing day and I'm having a buzzing noise issue. It sounds like it's from the power supply. I can hear the buzz even if nothing is connected to the amp. It's always present, even when the amp is powered off. I already exchanged the amp for another one and it has the same issue. The buzz is loud enough that I can hear it from a fair distance and is very distracting when watching a movie.

Anyone else having this issue?

I have a week left to return it and I'm not sure what to do.
Reply
Reply
post #3 of 19
1/17/13 at 6:03pm
Thread Starter 
Amp Humping noise is problem probably introduced by a ground loop in your home theatre system, it is not a defect with your new sound system. Maybe from your TV antenna or from your cable TV set top box. Anyway, to eliminate ground loop, you can buy a device call ground loop isolator, and attach to your sound source output or your antenna.
Reply
Reply
post #4 of 19
1/18/13 at 6:50am
I don't think this is a ground loop problem since the amp has the buzzing sound even if nothing else is connected to the amp. Ie: no speakers, no ethernet, no hdmi. The electrical wiring is brand new and other devices/amps work fine. For a ground loop to occur, there need to be other cables connected to the amp.

Also, the noise is a high pitched sound with a higher frequency than 60Hz. It sounds like a plasma TV buzz except that it's constant even when powered off.
Reply
Reply
post #5 of 19
1/24/13 at 6:07am
Hi everybody.

Just bought yesterday and setup today , I hv no problem for buzz sound issue.

I just know from above comment HT-E6750 is not real 7.1

The seller lie to me frown.gif and told me it 's real 7.1

Do we have night mode (Compressed sound ) ??
Reply
Reply
post #6 of 19
1/24/13 at 2:25pm
Thread Starter 
Hi Boyopo,
You are right, it is not a true 7.1 channel, if ever the BD movie has 7.1 track, the two rear channels will be ignored. But technically it has 7.1 channels with samsung's own implementation.
I can not find a night mode either, but the remote does has a button to adjust sub woofer volume directly., I guess you can reduce that bass volume at night to avoid disturbing the neighbor.
Reply
Reply
post #7 of 19
1/25/13 at 4:50am
Thank for your advice MickeyJC.

Anyway onething I need to know ,When I listen Radio or music,I hear sound only from the front speaker only. How can we play multi-chanel ,to get sound from all speakers.

I try to push all the button on remote but don't have any function to enable multi-speakers.
Reply
Reply
post #8 of 19
1/28/13 at 2:40pm
Thread Starter 
To enable multi channels for Music (Rear-iPod or iPod direct from front USB OR CD music), you can use "3D Sound" or "Sound Effect" functions.
However, "3D sound" does not Support in FM Radio mode, you can still use "Sound Effect" functions though.
Reply
Reply
post #9 of 19
3/6/13 at 12:15am
hello

this is my first post on this board. i'm italian so escuse me for my poor english.

i bouhght the e6750 system and i noticed audio not syncronized when i play movies from usb memory. you too?
Reply
Reply
post #10 of 19
3/7/13 at 4:10pm
Thread Starter 
Hi, net8eit
Yes, This happens to me too. It looks like a design flaw. The Audio Sync only works for Bluray Disc playback, not for the USB movies.mad.gif
Reply
Reply
post #11 of 19
3/17/13 at 2:27pm
Hi all, video and music Lovers out there,

Tomorrow i´m going to purshase 1 unit of HT-E6750w here in my country (VENEZUELA).

This units are selling here like hot cakes and after reading some reviews, i tooked the desition to buy one for pairing my 60" Samsung LED TV.

As soon as i installed on my livingroom and make the apropried tests, i will report back.

See ya all.
Reply
Reply
post #12 of 19
3/18/13 at 7:16am
Anyone who knows if there is any options to wall-mount the front speakers on the 6750w system? I would like to only use the "top module" and not the stand/foot
Reply
Reply
post #13 of 19
3/27/13 at 9:11am
I recently set up one of these systems in my bedroom. What sound & video settings would you recommend for primarily watching movies?
Reply
Reply
post #14 of 19
3/27/13 at 4:16pm
Thread Starter 
Quote:
Originally Posted by callev View Post

Anyone who knows if there is any options to wall-mount the front speakers on the 6750w system? I would like to only use the "top module" and not the stand/foot

It seems Wall mount only available for rear speakers, not the Front. However, if you have strong DIY skills, you can always DIY the connector of the front speakers.
Reply
Reply
post #15 of 19
3/27/13 at 4:18pm
Thread Starter 
Quote:
Originally Posted by williamsdwight3 View Post

I recently set up one of these systems in my bedroom. What sound & video settings would you recommend for primarily watching movies?

I normally use 3D Medium sound setting.
Reply
Reply
post #16 of 19
3/30/13 at 10:14am
I have the HT-E6730 and just got a pair of Pioneer floor speakers and center channel (SP-FS52 & SP-C22). Is it wise to hook those speakers to this system? Will it effect the speakers in anyway? The speakers were given to me and I would like to use them without having to buy a receiver.
Reply
Reply
post #17 of 19
4/2/13 at 8:51am
Hi all, do you know if the E6730W or E6750w have different input voltage ratings, depending on where you buy them. Specifically, if i purchase from amazon.com will I get a US power rated system which will not work in Ireland {220-240v}? I am hoping the systems are rated for all voltages.
Reply
Reply
post #18 of 19
4/4/13 at 8:37pm
Hello HT-E6750 owners,

Will you recommend buying HT-E6750 for $800 ..or Configuring the system like Denon 1713 + Cambridge Audio 51. set ?

Honest Suggestions invited..given basic issues like Audio sync happening .

Thanks
Airan
Reply
Reply
post #19 of 19
4/17/13 at 10:46am
Im quite disappointed with this unit. Why would they make it so i cant sync the audio with USB media, Netflix, hulu, etc.... I found this out too late to return the device. Are there plans to fix this? seems like a firmware update could fix it. I mean its ridiculous to have a smart device that cant play nice with any of the streaming video apps... WTF BOOOOO SAMSUNG
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Home Theater In A Box

AVS Top Picks

AVS › AVS Forum › Audio › Home Theater In A Box › Official Samsung HT-E6730W / HT-E6750W Owner's Thread