or Connect
AVS › AVS Forum › 3D Central › 3D Tech Talk › 3D processor ~ left/right image separation for dual projector setup
New Posts  All Forums:Forum Nav:

3D processor ~ left/right image separation for dual projector setup

post #1 of 2
Thread Starter 
I've been curious, if there's any other solution than Optoma 3D-XL or VIP 3D Evolver (not considering PC with dual dvi/hdmi outputs)?
For example, to configure my Oppo 103 to display only left image from hdmi1 and righ image from hdmi2 when playing 3D Blu-Rays? Or this is a no go even with firmware update...
post #2 of 2
I know two more of them :
The VNS Geobox 301 and VNS Geobox 501, the 501 is more expensive and hard to find but they also provide geometry adjustment, the 301 doesn't seem to be sold online at the moment.
The Shanghai Mviewtech MA2P202, also expensive but designed to support Full stereo 1080p60Hz from a single PC output (DVI Dual-link or DisplayPort 1.1a)
Edited by BlackShark - 1/10/13 at 1:33am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: 3D Tech Talk
AVS › AVS Forum › 3D Central › 3D Tech Talk › 3D processor ~ left/right image separation for dual projector setup