painting wall

Hello,

New to posting on the forum although have lurked here for many years now.

I recently purchased an Epson 8345 (similar to 8350) and it is ceiling mounted (8ft ceiling)in a basement family room. It is about 13 ft from the wall and the screen will be projecting on an approx. 100 inch screen. There is no natural light and the light in the room is controlled by a dimmer switch (pot lights although non-recessed ones). The ceiling is white and the walls in the room are a dull light green colour.
I will be rolling the paint on and my skills are very limited as a handy-man. I was looking at using Behr 1050 with 124 Lamp Black, 028 Brown Oxide, 012 Medium Yellow as per the DIY screen guide.
Am I on the right track for this?
Any input would be appreciated.

Thanks,

Thanks MM,

I will be pretty pressed for time over the next 2 months so I was planning on looking at something a little more complex at that time. If I use my original plan for now and then apply the RS-MaxxMudd LL over top in the future would there be any negative consequences to that?

Thanks again.