or Connect
AVS › AVS Forum › Display Devices › CRT Projectors › Looking for a crt expert in Chicago area.
New Posts  All Forums:Forum Nav:

Looking for a crt expert in Chicago area.

post #1 of 7
Thread Starter 
I just got my new/used zenith 1200x mounted to the ceiling. Looking for a crt expert to either walk me thru or come out and dial this puppy in.i got the basic set up done reading manuals and following the set up but I would like to get the max life and enjoyment out of this as I have a lot of time and $ already invested.

Running HDTV signal thru dvdo vp 50 to a HD fury 3 to the unit. So knowledge of these units also important.

Let me know who I can contact.

Thanks in a advance
John
post #2 of 7
Craig Rounds is your man, and is right in Chicago.

http://www.cir-engineering.com/
post #3 of 7
Thread Starter 
Curt. I called him twice and emailed him through his web site with no response. So not sure if he is still doing set ups.
post #4 of 7
Craig can be a hard man to pin down. Give it time and shoot him an email and give a follow up call. It took him a month to return my email once. Be persistent but not a stalker. smile.gif
post #5 of 7
Thread Starter 
K I will wait for his response then
post #6 of 7
He does indeed travel a lot to do setups, so that could be why, he may be out of town.
post #7 of 7
Hi,

Several weeks back I was down and out for a little while with some medical things going on... I had a pile of emails and VM's when I got back and I didn't return all of them because I figured many folks would have moved on. I am sorry if you tried to contact me and didn't get a response. I should be available all day tomorrow by phone. If I don't answer leave a VM and I will get back to you within 24 hours.

Again, sorry if you had tried in the past and I didn't get back to you. Please try again.

craigr
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: CRT Projectors
AVS › AVS Forum › Display Devices › CRT Projectors › Looking for a crt expert in Chicago area.