Behringer where to buy Online??

Hi All you Bassheads,

I am currently building 2 - Mach 5 IXL 18" Builds.. I am currently thinking of going with a Behringer iNuke 3000DSP that is Firm or at least a Amp with a built in DSP Unit..

Now I been looking locally and it appears this amp is more then I thought. I can get for 379.99 USD Plus Tax.. Now I was wondering if there are any Online Retailers that sell the Behringer for a Good price..

Thnx

wow never thought Amazon would have this amp..Cool and a good price too..Is Amazon an authorised Behringer retailer??

ok guys good sites i might buy it from amazon soon.. on a side not I need to get some speakon connectors for my Subwoofer i was wondering how do I determine how many poles do I need for the speakon connector. I am going to buy a Female connector for the cabinet I just dont know how many poles it needs to be??

Was also wondering if 2 of these IXL 18.4" will be a thumper.. I am mostly interested in getting good low bass for Pipe Organ music and movies..

I know the box is tuned to 16hz and should go a bit lower but not sure how much lower..I know from what I been reading these should be really good, I was just wondering what the closest ID comparison would be ?? would these 2 subs be more capable then 2 ULS-15's from HSU or 2 Submerssive captivatosr??

the box is 285l at 16hz tune..should be a very good performer..

Edit: I just bought the 2 IXL 18.4's. now to wait till I get the cabinets built and amp bought..
Edited by The_Nephilim1 - 2/13/13 at 8:44am

Would also need to know how many poles will the speakon connectors need to be, I am thinking they would need to be 2 pole?? but I am unsure..
Edited by The_Nephilim1 - 2/16/13 at 12:20pm

Yes I am going to use a single channel for each Subwoofer.. I am going to have 2 IXL18 Sub boxes..OK I guess the 2 pole should be good, I just need to get the Speakon Female connectors and cables..


I was wondering if I should bother with filling in the joints and sanding it down plus rounding the edges with a router before putting on the Duratex??

I have no WAF but would like to make the boxes look half professional..

Thank you for that thread.. I will be buyig those connectors and gasket.. asnd for some pics here are the drivers. I do NOT have them yet but these are them:

here is a few shots of the drivers:


































that is a 100lb of muscle..
I was wondering what kind of half round bit or more better what size half round bit will I need to round the edges on my 3/4" wood?? Tomorrow or should I say today ltr this morning I am going to finish up the one box.. well at least hopefully if I can get the correct half round bit..

OK I was wondering since I will be buying a Behringer iNuke 3000 DSP how would I setup the DSP, Do I hook the amp to a monitor or does it have an Onscreen display of sorts??

I will have to borrow my friends laptop but I think the PC should be better then the onscreen display.. Does it have built in software or do you need to install a program on the Computer for that to work??

I was looking there but did not know which one to get do you have any idea?????



well Finally got the Box Done still more to do to finish it .. I am going to cover it in Upholstery..But, while I wait for the Amp, going to be ordering that in 3 days.. I can't wait..

here are some Shots of the Box:






































Edited by The_Nephilim1 - 3/11/13 at 10:44pm

Ok I was in the wrong section, I was looking in the Download section. I found itwhere you said too look.. thnx..


EDIT: I was wondering if it is necassary to put feet on this behemoth. I will be placing it on my Riser stage in the back of the room..

AlsoI was wondering do I need to put some kind of like polly fill on the inside of my Sub Box??

haha, In all my of my excitement in getting this near completion IO near almost forgot to buy the Cable from the Recieve3r to the amp input..

On a side note do I use the sub out to the input of the amp??

Well Tonight I mounted the speaker and Speakon Plug and ran the wire.. My Nephew & I then moved it to the Home Theater and I remounted the driver in its place and hooked up the Wire.. It is all ready to go. I just need to wait till I get the Amp and both cables.. Which I have all 3 on order awaiting them in the mail..

This is like Christmas when I was a kid..

I was wondering are these DIY Subs supposed to be Airtight?? I wonder as I may need to put some caulk in a few spots where the wood was a little off.. I know I if these need to be airtight should caulk the inside but it is too late.. I will do the best I can on the outside..

well I just used some Caulk and looks like I got it all sealed up. it is now or should be airtight as I can get it.. there was only 2 strips that needed filling the rest was good and is sealed with the wood glue..

I am wondering what effect having NO foam in the Cabinet would do?? Would it sound funny?? Also do I need to get a driver gasket material, I saw some at Parts Express..
Edited by The_Nephilim1 - 3/17/13 at 8:19pm