AVS › AVS Forum › Display Devices › LCD Flat Panel Displays › 32" Samsung LCD LN32A300 color issues
New Posts  All Forums:Forum Nav:

32" Samsung LCD LN32A300 color issues

post #1 of 7
Thread Starter 
Not your typical "I don't know how to adjust my TV", but "I have to adjust the crap out of my TV just to make it usable"...and even then it has a green tint. This has been an issue over time and we've continued to tweak the settings but now it's bad. I reset to factory defaults and most blacks are green and grainy while in the normal setting, if I switch to dynamic the blacks are bright red. The LVDS contacts are still bright and shiny, wiggling the wire at any point doesn't change the colors. The menu colors seem to be consistent with factory colors.

Any ideas? Bad LVDS cable? Old panel? Time to upgrade?

Jesse
post #2 of 7
Thread Starter 
bump
post #3 of 7
Thread Starter 
So can anyone recommend a forum where people respond?
post #4 of 7
Thread Starter 
Ok, so doing some testing today and the menu colors started changing. I think I've narrowed it to a main board.
post #5 of 7
Thread Starter 
Turned it on with new main board, and it seemed fine at first, but after about 30 seconds the pink started fading into the menu color. Not the main board.
post #6 of 7
Thread Starter 
Are there any repair ninjas on here?
post #7 of 7
Thread Starter 
ttt
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: LCD Flat Panel Displays
AVS › AVS Forum › Display Devices › LCD Flat Panel Displays › 32" Samsung LCD LN32A300 color issues