or Connect
AVS › AVS Forum › Audio › Receivers, Amps, and Processors › Sound passthru to TV speaker
New Posts  All Forums:Forum Nav:

Sound passthru to TV speaker

post #1 of 5
Thread Starter 
Is there a way to have the sound come from the satellite box and not use the surround sound system but pass it thru to use the TV speakers aside from going HDMI straight from the sat box to the TV? Sometimes TV shows really dont warrant the sound going to the surround sound system as its just a show with primarily people talking.

Thanks in advance.....
post #2 of 5
Thread Starter 
sorry should have mentioned that I am using the vsx-1122-k receiver
post #3 of 5
According to the manual this receiver has HDMI standby passthru.

look on page 55 part 8 under HDMI setup. I do not own this receiver so I cannot provide any actual experience with it.

http://www.pioneerelectronics.com/StaticFiles/Manuals/Home/VSX-1122-K_OperatingInstructions070612.pdf
post #4 of 5
If it's still the same OSD as my 1222, just go into settings, input settings, HDMI settings, and set the HDMI port you want to passthrough.
post #5 of 5
Thread Starter 
thanks for your time and answers!! i was not sure what the pass through mode was about and to be honest I find it hard to read and navigate the Pioneer manual in PDF format. miss the old days of the paper manual.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Receivers, Amps, and Processors
AVS › AVS Forum › Audio › Receivers, Amps, and Processors › Sound passthru to TV speaker