or Connect
AVS › AVS Forum › A/V Control & Automation › Home Automation › Lutron Energi Savr - Using 3rd Party Switches / "IEC PELV Dry Contact Switch"
New Posts  All Forums:Forum Nav:

Lutron Energi Savr - Using 3rd Party Switches / "IEC PELV Dry Contact Switch"

post #1 of 2
Thread Starter 
Hi Everyone,


Was wondering if anyone has used 3rd party switches with the Energi Savr "ESN" multifunction inputs? The document below mentions them on page 1 and I understand what can be done with the from a programming POV but Lutron do not seem to want to offer any further information on what type of switches are suitable (Possibly because they don't make them). Has anyone here used 3rd party low voltage switches with the multi function inputs? Can a standard light switch be used?

http://www.lutron.com/TechnicalDocumentLibrary/369-609b%20ESN%20Phase%20Adaptive.pdf
post #2 of 2
Sure why not. Anything that meets/exceeds the class 2 rating. Just make sure to follow any class 2 wiring rules.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Home Automation
AVS › AVS Forum › A/V Control & Automation › Home Automation › Lutron Energi Savr - Using 3rd Party Switches / "IEC PELV Dry Contact Switch"