or Connect
AVS › AVS Forum › Display Devices › Display Calibration › Calibration for the LG 60PN5300?
New Posts  All Forums:Forum Nav:

Calibration for the LG 60PN5300?

post #1 of 6
Thread Starter 
can someone post the best settings for the LG 60PN5300? thanks
post #2 of 6
From the "sticky" threads above:

'Sharing display menu settings?'
http://www.avsforum.com/avs-vb/showthread.php?t=1055906
post #3 of 6
That thread has been closed. So I will share my settings I posted in another thread.

Ok here is professional calibration settings for my LG 60PN5300 TV. The Tv looks beautiful with these settings in my house, but should be a good base setting for you to work from.

LG 60PN5300
Energy setting: Off
Picture Mode: Expert 1
Panel Light: 100
Contrast: 70
Brightness: 100
H Sharpness: 10
V Sharpness: 10
Color: 57
Tint: Center

Expert Control
Dynamic Contract: Off
Color Gamut: Standard
Edge Enhancer: Off
Color Filter: Off
Gamma: Off
Color Temp: Warm 2
Method: 20 Point IRE
Pattern: Outer
Ire: 100
Red: 5
Green: 0
Blue: 24
Color: Cyan
Saturation: 0
Tint: 3
Luminance: 0

Picture Option
Noise Reduction: Off
Mpeg Noise Reduction: Off
Black Level: Low
Real Cinema: Off
Motion Eye Care: Off
post #4 of 6
Thread Starter 
thanks but i learned on here that Calibration is based on each house that it is in.
post #5 of 6
Quote:
Originally Posted by Caretaker13795 View Post

thanks but i learned on here that Calibration is based on each house that it is in.
Also based upon the fact that consumer electronics components have relatively broad tolerances that prevent equal settings values from performing the same on different units.

http://www.tlvexp.ca/2012/12/the-fruits-of-copying-settings-the-pioneer-lottery/
http://forums.hdtvtest.co.uk/index.php?topic=7202.0

It has been documented that some copied settings values have actually resulted in poorer performance than factory presets on some parameters. It is a myth that the numbers used from a calibrated display will produce an accurate image on another sample of the same make and model. It's simply a roll of the dice at best, and does not teach the copier anything about good video pictures.
post #6 of 6
Quote:
Originally Posted by Joker035 View Post

That thread has been closed. So I will share my settings I posted in another thread.

Ok here is professional calibration settings for my LG 60PN5300 TV. The Tv looks beautiful with these settings in my house, but should be a good base setting for you to work from.


Expert Control
Dynamic Contract: Off
Color Gamut: Standard
Edge Enhancer: Off
Color Filter: Off
Gamma: Off
Color Temp: Warm 2
Method: 20 Point IRE
Pattern: Outer
Ire: 100
Red: 5
Green: 0
Blue: 24
Color: Cyan
Saturation: 0
Tint: 3
Luminance: 0

Also it's not much help showing only one out of 20 individual greyscale points and only one (out of six) of the CMS settings ... wink.gif But what do I know? smile.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Display Calibration
AVS › AVS Forum › Display Devices › Display Calibration › Calibration for the LG 60PN5300?