I have a RX-V675 connected to a SVS cylinder sub via the sub1 preout. YPAO was run with gain at 0 and sub volume at 50% as suggested in the manual. The results of YPAO were -
- all distances were accurate
- all my speakers were set to small, which is correct.
- the LCR and surround speakers were set to either 0dB or a small value like +/- 2dB, sub was set to -4.5dB. I tried increasing the sub gain to no effect
- I set bass crossover to 80Hz
From the setup page, test tones to all speakers are fine, but the sub is not audible. If I turn the sub to nearly 100% then I can hear a faint output but that's obviously not right. With my previous Pioneer receiver, I barely had to set the SVS to 1/4th volume to get enough bass for my apartment. With Yamaha, even without YPAO I should be able to hear bass, right?