or Connect
AVS › AVS Forum › Gaming & Content Streaming › Networking, Media Servers & Content Streaming › I bricked my device argosy any ideas how to fix it?
New Posts  All Forums:Forum Nav:

I bricked my device argosy any ideas how to fix it?

post #1 of 2
Thread Starter 
I bricked my device eek.gif argosy trying to update to this HDP_R3_FW_121PAL_BOOTCODE_23, but <<i overlook the PAL and now the tv signal show for little time, I have to wait for every 3 minutes to see the image again but it goes away again, I also download the remote control codes from a harmony 650, but none the R2 and R3 are working only the power from the Argosy control work, I try to reset the box by using the following method, but not luck,

2) plug in usb flash drive with firmware (install.img) turn on hv335t on box (blue light on) found dd1073 (the one with heat sink) pin 197, short it to ground with wire (see picture below), turn on hv335t with remote control wait until usb flash drive light flash release wire from pin 197 then wait for firmware update complete.

http://img4.imageshack.us/img4/1421/0022cw.jpg

Any Ideas or sugestions?
Thank you
post #2 of 2
Thread Starter 
Please I need someone with experience, to help me to get out of this mess:)
New Posts  All Forums:Forum Nav:
  Return Home
AVS › AVS Forum › Gaming & Content Streaming › Networking, Media Servers & Content Streaming › I bricked my device argosy any ideas how to fix it?