or Connect
AVS › AVS Forum › A/V Control & Automation › Home Automation › My X-10 controller died....model CP-290
New Posts  All Forums:Forum Nav:

My X-10 controller died....model CP-290

post #1 of 2
Thread Starter 
I use a CP-290 to control the bells at the school where I work. A lightning storm came through and now it will not toggle the modules.

I can still communicate with it through the PC com port and the red LED lights when I push the buttons to toggle the modules, but the modules don't respond. I am on channel "A" in the software and the modules.

What can I use that will replace the CP-290? I know it's very old and there is probably newer technology but I would like to keep the modules I have. Anybody have an old CP-290 laying around?

Thanks.
post #2 of 2
Great opportunity for a school prank.

Check ebay for replacements. Also note the receiver modules could be damaged or need to be power cycled.
Edited by az1324 - 8/31/13 at 6:58pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Home Automation
AVS › AVS Forum › A/V Control & Automation › Home Automation › My X-10 controller died....model CP-290