or Connect
AVS › AVS Forum › Display Devices › Digital Projectors - Under $3,000 USD MSRP › Need help with setting up 3D properly
New Posts  All Forums:Forum Nav:

Need help with setting up 3D properly

post #1 of 9
Thread Starter 
I just got my 120" Elite fixed frame screen mounted today to go along with the Benq w1070 that I ceiling mounted a few days ago. Lovvvvvve the screen and the projector is pretty nice too.

I've never watched a movie in 3D so I'm not exactly sure what the image should look like. I have a pair of the 144 hz glasses that work with the projector. The problem is when I play the movie in 3D Full HD, the image looks.....

Well I can only describe it as if I were crossing my eyes and looking at the screen. I can't really read any of the print on the menus either. I'm not sure what I'm doing wrong.

Thanks in advance.
post #2 of 9
Thread Starter 
Really, guys?

All these posts here about 3D being great on this projector and that projector and no one can give me any advice?
post #3 of 9
Sounds like your sync polarity is reversed for your glasses. Check your projector's 3D menu for a "reverse sync" or similar control.

td
post #4 of 9
Thread Starter 
Will do. Thanks
post #5 of 9
What Glasses did you get? Watched star trek last night and was blown away at the quality
the benQ 1070 had!biggrin.gif

Blake
post #6 of 9
Thread Starter 
post #7 of 9
Thread Starter 
Quote:
Originally Posted by regalman82 View Post

What Glasses did you get? Watched star trek last night and was blown away at the quality
the benQ 1070 had!biggrin.gif

Blake

So you didn't have to switch anything up on the projector?
post #8 of 9
So you didn't have to switch anything up on the projector?


No i have a PS3 hooked up thru a dennon 2113 to the benQ 1070 and all i do is pop in the 3d movie and it detects it automatically.

I started with the Sainsonic 144hz and then switched to the monoprice 144hz versions, much better with the red flash and to me the contrast ratio .

Blake
post #9 of 9
Thread Starter 
Quote:
Originally Posted by regalman82 View Post

So you didn't have to switch anything up on the projector?


No i have a PS3 hooked up thru a dennon 2113 to the benQ 1070 and all i do is pop in the 3d movie and it detects it automatically.

I started with the Sainsonic 144hz and then switched to the monoprice 144hz versions, much better with the red flash and to me the contrast ratio .

Blake




Thanks. I believe I got mine working but the flashes are a pain to deal with. I wear glasses already so wearing two pairs gets annoying really fast.
New Posts  All Forums:Forum Nav:
  Return Home
AVS › AVS Forum › Display Devices › Digital Projectors - Under $3,000 USD MSRP › Need help with setting up 3D properly