Here is a little information what size tower will get.
The height is about 71 inches , width is approximately 19 inches and depth of 24 inches
The front will be about 2 inches thick in order to countersink the element and that
to round off the edge properly we like round shapes.
The back cover will be about 1.5 inches thick, it becomes recessed speaker connections.
And even where round the edges firmly.
It will be mahogany veneer on the sides and gloss black
There are three specific space for members of about 34 gallons .
We use Basta as the simulation program and simulates the isolation and
get with the isolation virtual volume of 47 gallons and get a Q- value of 0.67 .
I'll use Rockwoll flexible batts 35 which has a density of approx 37 kg / m³.
There will be three iNuke NU6000 in stereo 4ohm giving honest 1800W per channel
according to tests that will be used as drive .
A test ....
As a DSP , I will use DSPeaker Anti -Mode 2.0 Dual Core incredibly
DSP nice ..... but expensive.
Link to the DSP.
Some pictures of Revelen you will understand roughly what I expected .
Thanks for your help ... :-)
Edited by Cobra-427 - 11/17/13 at 8:59am