Menards has this tool for $59.95
Paladin SealTite® Pro Crimperhttp://www.paladin-tools.com/view_to...&parent_id=138
It claims to work with all manufacturer's compression fittings.
I have only purchased the Paladin fittings that are on the same shelf as the tool, so I don't know how well this tool works with "other" compression fittings. The package includes a long list of fittings/settings to use with other manufacturer's compression fittings.
This tool seems to work fairly well. I haven't used any other compression tool.
The instructions are a bit confusing at first, you need to switch the position of the "head", as it is in the position for setting RCA/BNC fittings as it comes out of the package.
There also seems to be some minor conflicts in the head adjusting position as stated in the instructions. A setting that causes the compression that is "too much" will result in the metal ring behind the 'O' ring to separate from the body of the fitting, resulting in a loose ring that will slide down your coax.
Some trial & error is needed to get familiar with this tool.
I replaced about 10 of my old "crimp" style fittings on RG6 coax that were made with a cheap Magnavox crimping tool, also sold at Menards.