I didn't understand your PM until I read this post.
Get a flashlight and make sure the green card of moome's IFB slides in on the black rails of the B slot.
And while you've got the flashlight, peek in the back and make sure there's a socket to plug into inside the projector.
The cover plate on my moome IFB was a little too large, so it didn't fit flush into the surrounding metal cover plates, so I had to put it in the C-slot, which I don't think the 1272 has.
Originally Posted by Fedman
Have a moment. Just rec'd Moome's card for my Sony 1272. Attempt to insert the card in slot B but there is nothing but air. No receiving connection on the 1272. Am I missing something. I have not had a change to look inside slot b. I need to find a flashlight. Let me know your thoughts. I do not want to damage my CRT.
I didn't get a signal or a link until I switched the jumper to "JP2 switcher" on the moome card, as shown on moome's instruction sheet.
I've tried all 3 jumper positions... it won't hurt your CRT. Just make sure you power down before removing the card.