Well, it was only a matter of time.
There's not much that seemed adjustable in there. Either that or I could't figure out how to do it. What I was
able to do was change "Limit PC" from "on" to "off" which solved my issue with my scaler providing a blander image. Apparently, the brightness/contrast of the display is limited for PC inputs from the factory. I assume this is to prevent image retention from PC users. It makes a big
difference. I'm not sure if it effects non-PC inputs as I've not tried yet. I suspect it doesn't.
I've had to back my contrast all the way down to 37 and brightness to 28. This is with the black level set to video all the way from source to display.
There are alot of neat things in there including a clock which shows the number of hours on the panel. Mine read 136. I was surprised at that as I wouldn't have thought I had that many yet.
To access push [EDIT], [EDIT], [EDIT], [EDIT] on the remote.*Access at your own risk*
Write everything down before changing anything
To leave the SM, repeat the access code or turn off the display.