Click on the Device's "More Options"
- Select "Adjust the delays (speed settings)"
Inter-key Delay: 300ms
Inter-Device Delay: 300ms
Start by adjusting the Inter-key and Inter-Device delays to 300ms or less. Then test the remote. If it works at 300ms, keep lowering the speed in 100ms increments and see if the device still responds. If it doesn't, increase it back up 100ms. In my experience, I've found that most devices will respond to 100ms and devices like Tivos will take an Inter-key of 0ms.
Click on the Device's "Troubleshoot"
- Select "Show me more problems"
- Select "Device doesn't appear to receive every command correctly."
- Select "The device responds too much to some commands (for example, volume up increases the volume too quickly)."
The default number of repeats is 3. Lower the repeat speed and see if the remote still responds. If it doesn't, increase the number of repeats until the device still responds. In my experience, most devices will respond with 2 or more repeats and devices like Tivos will respond with 1 repeat.