Originally Posted by runninkyle17
The THROUGH setting is not in Source Setup when I look. Also, I tried DTS-HD and TrueHD test tracks that I know for a fact were working perfectly before the 3D board upgrade. This is getting a bit frustrating. The only thing that has changed in the whole system is the 3D board upgrade and the firmware upgrade.
DTS 5.1, Dolby Pro Logic 5.1 tracks work just fine and register correctly. My computer is configured for 7.1 speaker config as it needs to be. The display on the D2v reads 7.1 PCM when playing the Dobly TrueHD track, but no sound output at all. The D2v display only reads Digital with no 7.1 or 5.1 reading when playing the DTS-HD track.
The THROUGH setting is only available on HDMI 1-4 connections. Under Source Setup scroll through Video Outputs Cnfg.
You should have choices 1-4 and THROUGH.
Note: If you use THROUGH you will not have audio on HDMI 2 out.
Note: You only need THROUGH for BluRay 3D video output. If you rip a 3D Blu Ray to SBS or Top/Bottom viewed with polarized glasses you do not need to use THROUGH.
Are the Blu Ray videos you are playing ripped files ?
Are you using MakeMKV or DVDFab to rip your files. You may not be getting the lossless audio streams.
Some BluRay discs I encountered said something like Uncompressed 7.1 PCM
or something like that. They were only 48k PCM. NOT lossless streams
They were not DTS HD Master or Dolby True HD audio.
If a ripped BD try using Media Info and check the audio files that are in the video you are using.
I asked before.
Are you using HDMI connection on the video card or on the motherboard ?
And you are using that HDMI connection for your audio ?Edited by thestewman - 12/23/13 at 4:38pm