Lidakang....You can mount a shelf on the wall and set a center speker on it and aim it down at where you set. My C7 is too big for the cabinet under my fatt screen. I built one out of 3/4 plywood and painted it flatt black.The top of shelf is even with the top of the Tv and my Tv is out from the wall so it almost touchs the top of the shelf. This gave me room to get behind my AVR and all the wires etc for maintance and not have to move anything
The lighting is odd, the corner of the room on the left side is just out of the camera lens. The L Cornwall is really in that corner.
You see how the C7 looks above my 55" flatt screen. HomeDepot cut the plywood for me and I screwed it together with traingle braces on each end and used 5 of those butterfly screws that you push into the sheet rock and they have a nut and the ends open up to press againt the inside of the wall if no studs were in line. I had to drill 1/2 holes in the back side of the plywood to fit them thru it and large washers and just screwed it up tight.Edited by Louis Bartay - 6/19/13 at 7:06pm